Quick Start Guide
DT12-10U1 9.6" LiquidCrystal Display TV
This guide is designed as a reference to help you start using your LCD TV quickly. Please refer to the User's Manual for more detailed installation and safety instructions.
Front View
Rear View
Channel
select
Volume
adjust
Remote IR sensor
Making Connections
Connecting to Antenna/Cable TV
A/V and Channel Setup
Watching Broadcast or Cable TV
1. After you have made the appopriate power and
source connections, press the power button to
turn on your television.
1. Connect one end of the VHF/UHF
(Antenna) or CATV cable to ANT Jack
(VHF/UHF IN Jack) on the back of the TV.
2. Press the TV button to select TV.
3. Press the MENU button on the
control panel to enter the OSD menu.
2. Connect the other end of the VHF/UHF
(Antenna) or CATV cable to the Antenna
or CATV socket.
4. Press the
button to select the TV setting.
5. Press the MENU button.
6. Press the
button to select TV/CA TV.
Selecting A/V Sources
Connecting to a VCR, VCD, DVD Player, or Video Game Console
1. Make sure your TV is turned on and a
device such as a DVD player is connected.
1.The illustratration
presented here
2.The cables are
color-coded(black,
red,white, yellow).
Connect each
2. Press the TV button on the
VCR
VCD
DVD
control panel to select different source signals.
TV/CATV channel number, AV1 or AV2 appear
on the screen.
shows you how to
connect your TV
to a VCR, VCD, DVD
player or video game
console.
color-coded cable to
the appropriate
connector on your
device.
Auto Channel Setup
B
R
W
Y
4-IN-1 A/V jack
S-Video
connector
1. Press the MENU button to enter the OSD menu.
Video game console
2. Use the channel buttons on the control panel to select the "TV Setting" menu.
3. Press the MENU button to enter the TV Setting menu.
B
R
W
4. Press channel buttons to select Auto Program.
Y
5. Press the MENU button to enter the Auto Program Setting submenu.
6. Press channel buttons to select ON or OFF and press the MENU button.
7. Your television will begin automatically memorizing the available channels.
4-IN-1 A/V cable
AV connectors
Connecting the Power Adapter
Auto Program
1. Connect the power cord to the power
adapter as illustrated.
TV Setting
2. Plug the power adapter connector into
the DC-IN input jack on the rear panel
of the TV.
+
CH
A
M
-
Auto Program
3. Insert the three-pronged plug at the
other end of the power cord into a
power outlet.
ON
OFF
Note : For information on connecting your
TV to a computer, refer to the user's
manual.
Copyright 2004, Hannspree California, Inc. All rights reserved.
MAD-001154
|