Haier Cell Phone N60 User Manual

USERS’ GUIDE  
Thanks for purchasing Haier mobile phones, which are a combination of the essence of  
high technologies, stylish designs and a plenty of functions. They are expected to bring  
endless funs to your life.  
Before the use of Haier mobile phones, please read this users' guide and keep it  
carefully for further reference.  
This guide serves as an operation guide instead of a quality guarantee. Haier Group  
Company of Qingdao reserves all the rights to interpret typing errors in this guide,  
inconsistency with the latest materials and upgrading of soft wares and make changes at any  
time. Such changes will directly be edited into the new edition of users' guide without further  
notice. This users' guide is edited and printed by Haier Group Company of Qingdao.  
All rights reserved!  
To be held responsible for reprint!  
 
Attention  
There are no user serviceable  
parts inside this product. If this  
product appears to be broken,  
call qualified service personnel  
and send this product to the  
appointed mainantenance service  
center.  
Do not attempt to disassemble or  
repair this product as it may result  
in electric shock or unrecoverable  
damage to the product itself.  
Keep this product out of reach of  
small children.  
Store this product in its protective  
case in a cool dry place.  
Dispose of used batteries; please  
connect your local waste disposal  
centers. Do not throw the battery  
near fire source in order to avoid  
explode.  
 
Fast guides for N60 Mobile phone  
* Enter main menu  
List and User-disk.  
* Basic Operations  
1. In idle mode press left soft key to access  
main menu.  
2. In the main menu, press up/ down/ left/ right  
of navigation key to select menu list.  
3. In the main menu, press left soft key to  
access the selected menu.  
Turn on/ off: long press power/ hang up key  
Dial call: input phone number and then dial  
End a call: press power/ hang up key  
Answer a call: press calling key/ left softkey  
Adjust volume: press MODE/MENU key of the  
phone left side  
4. In the main menu, press the right soft key to  
switch display mode of menus.  
Return to main menu/ idle screen: press HOME  
key  
5. Press OK to access the selected menu in the  
main menu.  
6. In the main menu, press HOME key to return  
to the idle screen.  
7. Press and hold power/ hang up key to turn off  
the phone.  
* Left and right soft key perform each function  
indicated by labels at the bottom corners show  
the current soft key functions.  
Show/conceal audio player: press MP3 key  
Erase/erase all/ return to the previous: Press  
CLR  
Speed dial/select option function of list: you can  
press and hold any of the keys from 1 to 9 to  
quickly make a phone call from the menu list.  
Notice: in DC mode, press CLR key doesn’t exit  
this mode.  
* Direction for use the rotary screen  
When your phone’s flip is open, the flip revolved  
90° along the clockwise or revolves 90° or 180°  
* In the idle mode, double-press this screen can  
access to shortcut option screen. In there  
including: Edit SMS, Dictionary, Email, NotePad, along the counter clockwise, when revolve to  
Video play list, Call Forward, Recorder, Photo the180° position, then close the flip, the phone  
 
enter PDA operation mode.  
* Directions for use touch-pen  
The touch-pen of mobile phone can help you  
operate the mobile phone better.  
is not service of guarantee of repair.  
The correct method of installs or take out  
battery  
Installing the battery  
The touch-pen is a perfume pen, before use it  
inject the selected perfume in the special cylinder  
of the touch-pen.  
Notice: please control the speed and  
quantity during injecting.  
* Correct using the MMC/SC card  
Use the MMC/SD card and thick battery in  
this phone. The phone indicates the loading  
is successfully established, and the SD icon  
Turn the phone upside down and then hold  
the phone by the left hand. Aim the  
protruding part at the bottom of the battery  
at the groove of phone, and then press the  
top part of the battery lightly until you hear a  
click. (As shown FIG 1)  
Taking out the battery  
Turn the phone upside down and then hold  
the phone by the left hand. Push up the latch  
on top right corner of the screen turns yellow. at the top of the battery by thumb of right  
If you want to take off the MMC/SD card,  
first of all, you must click the SD icon to  
uninstall it and then to take off this card.  
Notice: to take off /on the MMC/ SD card  
unlawfully or take off the card in service may  
be cause irremediable defect. Please use it  
correctly acceding to the operation method.  
(If the card is damaged irremediably  
because of take off/on card unlawfully, there  
hand to uplift the battery and separate with  
the main machine, and then take out the  
battery. (As shown Fig 2)  
Latch  
Battery  
Protruding part  
Groove  
 
Notice: If according to this step operation  
cannot cause the contact of phone to  
destroy and is unable to use. To install and  
take out the battery, please accord to correct  
method above.  
 
directly.  
introduction to your phone  
1.1 Keypad  
Press left key: enter ‘Haier world, Monternet  
and Haier’ option screen directly.  
Press right key: enter ‘SMS’ menu directly.  
OK key  
With this key you can select or enter the  
option at flashing cursor location.  
In idle mode: press this key to access main  
menu screen.  
Left soft key  
Press this key to access main menu screen.  
Right soft key  
Press the key in idle mode to enter profile  
mode directly.  
HONE key  
Power/hang up key  
The red key on top right corner of the  
keypad is power key. Press and hold the key  
can switch on/off the mobile phone.  
Pressing the key can end a call during a call  
or reject to answer a call. Pressing the key in  
the profile menu can save set return to the  
idle mode.  
Call key  
The green key on top left corner of the  
keypad is call key. You can dial or answer a  
call with the key.  
Press the key in idle mode can enter  
‘outgoing call list’ option.  
Up/down/left/right key  
The navigation keys can control the cursor  
directions.  
In main display, press the key to return to  
idle mode; during running press the key  
continuously to return to the main display.  
MP3 key  
Press this key to show or conceal audio player  
directly.  
In idle mode:  
Press up key: enter ‘call list’ menu directly.  
Press down key: enter phonebook menu  
 
Touch-pen  
Camera key  
Right side key 2  
Right side key 3  
Left soft key  
Up key  
Right soft key  
MP3  
Right key  
Down key  
Power/  
HOME key  
OK/ Middle key  
Hang up  
CLR key  
Keypad  
MODE key  
MENU key  
Left key  
Call key  
 
CLR key  
In the edit box press the key to conversion  
among input modes.  
# Key  
In idle mode, you can input number first, and  
then press briefly the key input ‘#’, press and  
hold this key to activity ‘meeting mode’  
feature. Input number first during dialing,  
and then press and hold # key to input ‘P’.  
In the edit box press this key to access  
corresponding punctuation symbol.  
Press the key to erase/ erases all text in edit  
mode; press the key to return to previous  
menu in no-edit mode.  
Number key 0-9  
You can press briefly the number keys 0-9  
to enter the phone number option menu and  
show correspond number; press and hold  
number 1 to access the ‘voice box’ and  
press and hold number 2,4,5,7,8 to access  
speed dial or 1-touch dial key (need setting),  
press and hold 0 to enter ‘phone set’ option,  
and hold press 3,6,9 to asked you whether  
active the ‘Call Forward’ feature respectively.  
In the option list press and hold the number  
keys 1-9 to select corresponding option feature.  
Key  
MODE key  
This key on the left side of the phone body  
press the key can increase volume.  
In the ‘camera’ or ‘video’ mode, press this  
key to switch among camera/ picture/ video/  
movie.  
Press briefly the  
Key in idle mode to  
MENU key  
enter the phone number option menu and  
show * in the input box; press and hold the  
key can enter the phone number option  
menu and show +/W. (The first show +, and  
then show W)  
This key on the left side of the phone body,  
press the key can decrease volume.  
In the ‘camera’ or ‘video’ mode, press the  
key to select desired option.  
 
Camera key  
1. In idle screen, press left soft key (or use the  
touch-pen to click the ‘menu’ in the  
indication area) to access the main display,;  
press the right soft key in idle screen ( or  
use the touch-pen to click the ‘profile icon’ in  
the soft key indication area) to enter the  
profile mode.  
This key on the right side of the phone body,  
press and hold the key in idle mode to  
activity camera/ video feature.  
In the ‘camera’ or ‘video’ mode press the key  
to shoot picture.  
Right side key 2  
On the right side of the body is side key 2, in  
camera mode, when you browse display  
press the to zoom in focus; in camera and  
video mode, right shift the cursor. When you  
brown the picture screen press the key to  
switch to the next picture; in movies brown  
screen press the key to switch to the next  
movies screen.  
2. Main display: the five icons in last right  
side of the main display screen indicates  
five classes as follow: setting class,  
communication platform, multimedia class,  
tool class and fun class.  
3. The quick feature columns icon on the  
top of the screen indicator as follow  
from left to right: network signal, dial call,  
SMS, MMS, call list MP3, memory,  
HOME button as well as battery power  
level.  
4. In any display, may use the touch-pen  
to click the quick feature icon or  
indication massage box or menu. (See  
the clicked icon whether is availability or  
not.)  
Right side key 3  
Right side key 3 on the right side of phone  
can zoon out focus in camera mode, in the  
camera and video display screen, press the  
key to move left the cursor; in the picture  
view display, press the key to switch to  
previous video.  
1.2 Idle and main displays  
 
5. MMC/SD card: click the SD icon in  
quick feature columns to enter MMC/SD  
card option screen to view/ uninstall it.  
1.3 Using the power  
3) Charging the battery  
Attach the charger to the phone  
Plug the joint of the charger into the  
accessory port of the phone.  
Warning: You must put the phone at the  
draught of temperature +5-+40when  
charging, and must use the Haier batteries  
and charger provide by the provider. It will  
arise danger when you use unconfirmed  
charger and it will violate certification and  
guarantee items.  
The battery level indicating bars start  
varying, indicating that the battery is being  
charged. The display lamp of charging  
changes red.  
When the lamp of charging changes green,  
the battery icon is full when the battery is  
fully charged.  
Remove the charger; Plug the transformer  
unit into an easily accessible AC power  
socket.  
You can use the USB to charge, insert the  
USB prompt ‘whether use the USB’ select  
‘no-use’ to charge, if you select ‘using’ it will  
indicate the USB used by way of memory.  
Notice: 1. Press and hold the buttons of both  
sides of the charger after the charging to  
plug out the charger.  
1) Using the battery  
Phone’s stand-by time and calling time  
provide by the provider, it is base on the  
good operational environment. In practical  
application, the battery’ working time has  
change along with the different of the  
network condition, work environment and  
using method.  
2) Charge Indicator  
In main display, the battery power level  
showed on top right corner, though this icon  
to know the surplus.  
2. We suggest you to charge the battery fully  
when you use the phone for the first time.  
 
3. Do not pull out the plug of the charger  
during the charging to avoid harming of the  
phone and charger.  
the main machine, and then take out the  
battery. (As shown Fig 2)  
4. You must put the phone at the draught of  
temperature +5-+40when charging,  
and must use the charger offered by the  
provider. It will arise danger when you use  
unconfirmed charger and it will violate  
certification and guarantee items.  
5. Vibrate feature will is invalidate.  
4. Installing and taking out the battery  
Installing the battery  
Turn the phone upside down and then hold  
the phone by the left hand. Aim the  
protruding part at the bottom of the battery  
at the groove of phone, and then press the  
top part of the battery lightly until you hear a  
click. (As shown FIG 1)  
Latch  
Battery  
Groove  
1.4 Connecting network  
1). SIM card  
Protruding part  
Your provider provides Subscriber Identity  
Module (SIM) card for your phone, contains  
your phone number, service details, and  
phonebook/message information. Make  
sure that you have inserted a valid SIM card  
before use the phone; otherwise, you cannot  
use the feature in the SIM card.  
Any related information with establishment  
network connection recorded in card, and  
record phone name, number and message  
in the SIM card also. You can insert the SIM  
card into any GSM phone to use (a new  
Taking out the battery  
Turn the phone upside down and then hold  
the phone by the left hand. Push up the latch  
at the top of the battery by thumb of right  
hand to uplift the battery and separate with  
 
phone can recognize automatically.  
you can use PIN (Personal Identification  
Number) to protect your SIM card form  
unauthorized use. Once the PIN is activated,  
you will be required to enter the PIN code at  
the time your phone is turned on. You can  
disarm the protect code, if so, the SIM will  
be not prevent random use.  
Press and hold power/ hang up key to turn  
on your phone and press the left soft key (or  
use touch-pen to click the soft key) to  
confirm. If you enter a wrong PIN code three  
times, the SIM card will be locked, and need  
input PUK code.  
In order to prevent loss and damage  
information of in the card, should avoid  
touching the metal plane region, Avoid  
exposing your SIM card to electricity,  
magnetism. The card damaged once, the  
user will not be able to enter the network.  
Warning: Turn off the phone when you take  
out the SIM card. Forbids absolutely to  
insert or to take out the card while the phone  
connected the external power.  
2). Insert SIM card  
Before remove or insert the SIM card please  
take out it carefully. Turn off your phone and  
then remove battery as well as other  
external power. Slide the SIM card under  
two lugs with the metal contacts facing  
downward, push the SIM card so that it  
clicks into place. If user wants to take out it,  
please turn the phone off firstly then take out  
phone’s battery and last take out SIM card.  
3). Insert the SIM card  
Pay special attention to: there is a stander  
PIN cord (4 to 8 digits) of your SIM card is  
pre-configured and communicated to you by  
your network provider. You can personalize  
the PIN code.  
4) Network Connection  
If a right code is entered your phone will  
start searching for the Network Settings.  
5) Switch on/ off  
In order to prevent random use your phone,  
Press and hold power/hang up key to switch  
 
on/off the phone. If the PIN is activated,  
when you switch on the phone, you may be  
prompted to enter the PIN code.  
code. If so, please contacting your SIM card  
supplier.  
6) Dial call  
a. Input the PIN code  
When the sign of the Network provider is  
displayed screen, your phone enter idle  
display to dial and answer call.  
In quick feature display from the left first icon  
is signal intensity. All mobile phones may be  
obstruction subject to interference, which  
could affect the performance of the mobile  
phone. So moving within small range can  
advance the signal strength.  
You can use PIN to protect your SIM card  
form unauthorized use. Once the PIN is  
activated, you will be required to enter the  
PIN code at the time your phone is turned  
on.  
For the sake of confidentiality, the code is  
displayed as a group of “*” in the screen.  
Press the left soft key (or to click the soft key  
with touch-pen) to confirm, after a short time, Make a call in idle mode have dual mode  
if a right code is entered your phone will start  
searching for the Network Settings. Once  
the network name is shown on the screen,  
you can dial or answer a call. If no network  
name is shown on the screen, need you to  
register again.  
If you make a wrong input, you can press  
CLR to delete the wrong numbers. If you  
enter a wrong PIN code three times, the SIM  
card will be locked and asked you input PUK  
such as: direct dialing, call from the  
phonebook, call from call list, call form SMS  
and MMS, speed dial, call from SIM card. (if  
you have set PIN code must input right  
secret code to dial a call)  
In any country where the digital GSM  
network is used, you can make emergency  
calls when your mobile phone in the  
coverage network area (you can get it by  
means of inspecting the network signal  
 
indicator on the left top corner of the screen.)  
and you can make emergency calls without  
SIM card.  
112 is the standard GSM emergency  
number, which can be used by any GSM  
network in the world.  
 
called time and caller’s phone number and  
name will appear on this screen.  
Call  
2.1 Dial call  
Pressing right key, power/hang up (or click  
‘hang-up’ button by touch-pen) to end a call.  
The screen will show how much time you  
have spent on a last call.  
When your service provider’s icon display  
the screen, to wit enter idle mode and you  
can make or answer a call. The signal  
indicator in the top left corners of the screen  
Indicates strength of signal being received.  
There are 4 bars is the most signal indicator.  
All mobile phones may be obstruction  
subject to interference, which could affect  
the performance of the mobile phone. So  
moving within small range can advance the  
signal strength.  
2.1.1.2 Dial extensions of fixed telephone  
Some extensions of fixed telephone cannot  
be got through directly. So you need to get  
through the leader and then the extension  
number, if you insert ‘w’ ‘p’ between two  
numbers while inputting them the handset  
will finish dialing the leader and  
automatically dialing the extension number.  
The method of inputting ‘w’ ‘p’ is as follows:  
input the call time and press # key (‘w’ will  
be displayed on the screen at this moment).  
Then press long #(‘p’ will be displayed on  
the screen).  
Make a call in idle mode have dual mode as  
direct dialing and call from the phonebook.  
2.1.1 Direct dialing  
2.1.1.1Dialing domestic telephone  
The best simple means is enter phone  
number (make a domestic telephone, enter  
area code) then press call key (or use  
touch-up to click the call key button) to make  
a call. The display screen appears ‘linking’  
during dial a number, when calling there is  
You can dial main and extension number  
directly by input ‘w’. Feature of ‘w’ is  
shortening processing of call. Once input  
‘number’ + ’w’ (delay time) + ‘operating  
 
number’+ ‘w’ (delay time)……, and then  
press call key (or click ‘call key’ icon by  
touch-pen) to dial. Method of input ‘w’ as  
follow: press and hold * key while you input  
(first show ‘+’ and then show ‘w’ in ‘the  
number display screen’.  
2.1.1.4 Make an international call  
Make an international call  
If you make an international call , you only  
enter ‘+’ (double press* key until  
”appears on the screen), then enter  
country code and phone number.  
For example: extensions fixed phone can be  
got through directly, input follow number to  
dial: main phone number ‘P’ extension  
phone number, then press call key (or click  
the call key icon by touch-pen), this phone  
will dial extensions automatically.  
For example, if you make a Gallo call, you  
can double press * key (appears on ‘+’) 33  
(France code) then input district code and  
telephone number.  
2.1.2 Dial from the phonebook  
Press down navigation key in idle mode to  
access ‘phonebook’ menu and then select  
desired number to select ‘call’ menu in soft  
key indicator, or after select this recorded to  
dial it directly.  
Or enter ‘call’ dialing screen to select  
‘phonebook’ option in soft key indicator so  
that enter phonebook. To select desired  
number, when the number displayed in  
number show column press call key (or click  
call key icon with touch-pen) to dial this  
number.  
2.1.1.3 Dial IP call  
The first, enter ‘phonebook’ option to set IP  
number. Afterward, enter ‘call list’ option to  
input toll number, then select ‘IP call’ option  
in ‘menu’ of soft key indicator, insert IP  
number automatically in front of phone  
number and then dial it.  
If you don’t set IP number in the phonebook,  
so then your phone will indicates ‘no have IP  
number’ when you input toll number to dial  
IP number.  
 
2.1.3 dial from call list  
Enter ‘MMS’ option and select a downloaded  
successfully MMS to dial sender number  
directly or select call option in soft key  
indicator to dial this sender.  
In idle mode press the call key to access  
‘outgoing list’ of call list, and select a  
recorded number to dial it directly by press  
call key. Or select ‘call’ menu in soft key  
indicator to dial this recorded number.  
Press up navigation key to access ‘call list’  
option and then select a recorded number to  
dial it directly by press call key. Or select  
‘call’ menu in the soft key indicator to dial it.  
Or you can enter Call option screen or select  
‘call list’ option of menu in the soft key  
indicator to access the call list option. When  
you select a recorded number to dial directly  
by press call key. Or select ‘call’ option  
menu in the soft key indicator to dial it.  
2.1.4 dial from SMS  
2.1.6 Fast dial  
Fast dial is also called contract number dial.  
You can separately set the 5 digital keys  
(2,4,5,7,8).  
In the idle screen, long press the digital keys  
(2,4,5,7,8) that have been set to be dialed  
singlely, you will find the telephone number  
is dialed automatically relevant to the setting.  
If what you select is not set to be dialed  
single, the mobile phone will remind you that  
‘single key dial is not set’ and point out  
whether you need to set single is started,  
you need to first input the password and  
then to set the single key dial.  
Press right navigation key in idle mode to  
access SMS option, and then select a SMS  
massage to dial sender’s number directly by  
press call key or select ‘call’ option in soft  
key indicator to dial sender.  
2.1.7 dial number in SIM card  
In idle screen, press digital keys and * key,  
then press call key (or click call key icon by  
touch-pen) to dial number in SIM card, that  
is to say, the number stored in  
2.1.5 dial from MMS  
 
corresponding station of SIM card will  
display automatically.  
2.2 Access failure  
comes, the display screen don’t shown  
caller’s information, only show incoming  
flash).  
When the phone cannot put through, for  
instance, the opposite party ‘line is busy, he  
refuse to answer the phone, he is not in the  
service district or the phone is switch off’,  
the phone will remind you that ‘the phone  
cannot put through’. At this very moment, if  
you have set redial automatically, the mobile  
phone will automatically redial the telephone  
you dialed just now until it doesn’t get  
through after dialing for ten times or you  
initiatively cancel the dial.  
When the mobile phone rings and it is  
informed from the screen that there is a new  
call, press call key, power/ hang up key (or  
click the answer in soft key indicator with  
touch-pen) to answer the phone.  
When the talk ends, press right, power/  
hang up key (or click the refuce in soft key  
indicator with touch-pen) to hang up.  
If you are answering the phone, your mobile  
phone will inform you of the new call with  
short “du du”. At this moment, you can press  
call key, left soft key (or click the answer in  
soft key indicator with touch-pen) to answer  
the new call, while the formerly answered  
telephone will get into the keep-talking state.  
The formerly answered call will been hang  
up.  
2.3 Answer the Call  
2.3.1 Answer a Call  
When a new call comes, the mobile phone  
will show the sign of the new call and the  
telephone number or the name, and also, it  
will inform you of the new call according to  
your setting----vibration/ring/vibration plus  
ring/ mute (If your phone no have shown  
incoming call feature, when a new call  
If you are answering the two phones, your  
mobile phone will inform you of the new call  
with short “du du”. You can press call key,  
 
left soft key (or click the answer in soft key  
indicator with touch-pen) to answer the new  
call, the formerly answered call will been  
hang up. The formerly answered telephone  
will get into the keep-talking state.  
If you want to refuse a call you can press  
right soft key, power/hang up key (or click  
‘refuse’ or ‘busy’ icon by touch-pen) to  
refuse new call.  
opposite sound come out from reproducer  
but no incoming from headphones.  
2.3.3 Answer incoming with earphone  
When a new call comes, the mobile phone  
will show the sign of the new call and the  
telephone number or the name, and also, it  
will inform you of the new call according to  
your setting----vibration/ring/vibration plus  
ring/ mute. If you connect the earphone with  
the phone, answer and hang up the  
incoming call with press the button of  
earphone. Press the button of earphone  
again to end the call.  
2.3.4 Close the show incoming feature  
When a new call comes, the mobile phone  
will show the sign of the new call and the  
telephone number or the name, and also, it  
will inform you of the new call according to  
your setting----vibration/ring/vibration plus  
ring/ mute.  
2.3.2 Answer call with freehand  
When a new call comes, the mobile phone  
will show the sign of the new call and the  
telephone number or the name, and also, it  
will inform you of the new call according to  
your setting----vibration/ring/vibration plus  
ring/ mute (If your phone no have shown  
incoming call feature, when a new call  
comes, the display screen don’t shown  
caller’s information, only show incoming  
flash). When a new call comes, the mobile  
phone will show the sign of the new call,  
click the signal with touch-pen to answer it,  
namely, your phone was in freehand mode,  
2.3.5 Cancel incoming  
When a new call comes, the mobile phone  
will show the sign of the new call and the  
 
telephone number or the name, it will talk  
you according to vibration/ ring/ vibration  
plus ring/ mute by your set.  
When a new call is coming, press right soft  
key or power/hang up key (or click cancel or  
busy button by touch-pen) refuse the new  
incoming call.  
According to your set or the service provided  
by the network, the call maybe alters to  
other number or in busy state.  
leader’s number.  
2.4.2 Adjust Volume  
You can press MODE, MENU key to  
increase or decreased the volume of the  
phone while talking.  
2.4.3 Option  
The functions can be activated by pressing  
option. There are five contents in the menu:  
preserve the talk, turn on/off the hand free,  
telephone list, message, mute and new  
calls.  
2.4 In the process of calling  
In the process of talking, the following  
functions can be fulfilled: dial extensions,  
adjust the volume, preserve the talk, turn  
on/off the hand free, call list, messages,  
silencing and new calls.  
Preserve the talk Preserve the present talk  
(relating to SIM card), thus, neither of the  
sides will hear the voice of each other.  
Change preserves the talk into regain the  
talk, you can return to the normal talking.  
Hand-free The sound of both sides will be  
sent to each other by loudhailer, in the  
meanwhile the Hand free alters to Cancel  
the hand free, then by this item you can  
2.4.1 Dialing Extensions  
After hearing the notice sound of the  
opposite telephone, dial the extension  
number directly which will be displayed on  
the screen; while finish dialing the extension, return to the normal talk(when the mobile  
press right soft key (or click return in soft key  
area by the touch-pen) to display the  
phone is connected to the other fittings,  
such as earphone, the loudhailer maybe  
 
stop working);  
2.4.6 Answer the New Call  
Silent Turn off the voice temporarily in  
talking then you can hear the opposite party  
while he cannot hear you. Thus, it is  
convenient for you to talk with others in your  
side while talking on the phone. Change the  
item into cancel mute, then you can return to  
the normal talking  
Call list Enter the call list, then you can  
search the phone number while talking, the  
talking direction and the talking state.  
New call Dial the second call (relating to SIM  
card).  
When answering a new call, the former talk  
will be in the preserved state. You can  
choose the Holding to activate the former  
talk while the new call will get into the  
preserved state (relating to SIM card).  
2.4.7 Dial the Second Call  
You can dial the second call in the process  
of dialing the first. The concrete method is to  
select new call to show the new window for  
dialing, or press the digital key directly. You  
can also press the call key to dial the new  
call (click the call by touch pen).  
2.4.4 Hang Up  
When getting through the line, the number in  
process of talking will be displayed in the  
bottom line. You can press Up/Down (or  
click it by the touch pen) to switch the talk.  
2.4.8 Answer two calls simultaneously  
When getting through the two lines, the  
number in process of talking will be  
displayed in the bottom line, while the other  
will get into the preserved state. You can  
press Up/Down to switch the two talks.  
Press right soft key, power/ hang up (or to  
press the hang up in the function area to  
hang off the phone by the touch pen). After  
the phone is hung off, the call time will be  
displayed.  
2.4.5 New Messages  
The mobile phone will inform you of the new  
message (SMS or MMS) with notice sound  
when you are talking on the phone.  
 
When getting through the second telephone,  
you can choose the following functions:  
holding, conference call (relating to SIM  
card), hand free, mute, telephone list.  
Holding Keep the present call(relating to  
SIM card), then the both sides can not hear  
the voice of each other, then the holding  
alters to cancel holding, press it then you  
can keep the normal talking.  
Mute Turn off the voice in talking temporarily,  
and you can hear the opposite party while  
he cannot hear you. Thus, it is convenient  
for you to talk with others in your side while  
talking on the phone. Change the item into  
cancel mute, then you can return to the  
normal talking.  
Telephone list You can get into the  
telephone list to search the telephone  
numbers, the talking direction and the  
talking state in the process of dialing .  
2.4.9 Conference call A call conference of  
many people can be hole, and a separate  
talk with the very attendee pointed can be  
run. The concrete number of the attendees  
will be supplied by network.  
You can hang off all the calls and the call  
time will be displayed by press the right soft  
key/hang off /(or click the hang off by the  
touch pen). If there are missed calls in the  
process of talking, it will be informed on the  
screen, If new call or new messages (SMS  
or MMS) are coming, they will be informed  
Conference call A call conference of  
many people can be hole, and a separate  
talk with the very attendee pointed can be  
run. The concrete number of the attendees  
will be supplied by network.  
Hand-free The sound of both sides will  
be sent to each other by loudhailer, in the  
meanwhile the Hand free alters to Cancel  
the hand free, then by this item you can  
return to the normal talk(when the mobile  
phone is connected to the other fittings,  
such as earphone, the loudhailer maybe  
stop working);  
 
by the notice sound.  
The following operations  
accomplished by option in the process of  
conference call; holding, seperarated, hand  
free, mute, telephone list, redialing.  
Holding Keep the present call (relating to  
SIM card), then the both sides can not hear  
the voice of each other, then the holding  
alters to cancel holding, press it then you  
can keep the normal talking.  
Separated when the opposite partner is  
selected, press the Separated, and then you  
can talk with the partner separately, in the  
meanwhile, two calls are through. If you  
want to back to the conference call, press  
conference.  
Hand-free The sound of both sides will be  
sent to each other by loudhailer, in the  
meanwhile the Hand free alters to Cancel  
the hand free, then by this item you can  
return to the normal talk (when the mobile  
phone is connected to the other fittings,  
such as earphone, the loudhailer maybe  
stop working);  
can  
be  
Mute Turn off the voice in talking temporarily  
and so you can hear the opposite party  
while he cannot hear you. Thus, it is  
convenient for you to talk with others in your  
side while talking on the phone. Change the  
item into cancel mute, then you can return to  
the normal talking process  
Telephone list, you can get into the  
telephone list to search the telephone  
numbers, the calling direction and the calling  
state in the process of dialing.  
Redial Dial the second number (relating to  
SIM card)  
Notice; All the imitational equipment are  
invalid in the process of talking, and the  
sound volume will decrease 50%.  
2.4.10Search the telephone list in the  
process of talking  
If you want to be back, press Home.  
Press the direction sign, you will enter the  
telephone list.  
 
2.5 change the incoming tone  
the phone cannot be used, such as, while  
having a call, the customers cannot use the  
music player to play the music. And the  
phone will inform you)  
Press right soft key in the await screen (or  
click the sign mode by touch pen) to change  
the way of incoming tone.  
2.8 checking the IMIE number of the phone  
Enter the application of the mobile phone,  
you can input the number”* #06*”and the  
calling key (or use the touching key to press  
the calling key) to get the IMEI number.  
2.9 The phone recording  
You can touch the key of recording on the  
top right in the calling, receiving call and call  
duration windows to have phone record. But  
the recording can only be done in the  
process under calling. The recording files  
will be stored in the recording files of the  
customer’s resource automatically.  
2.6 Emergency Call  
In any country where the digital GSM  
network is used, you can make emergency  
calls when your mobile phone is placed in  
the network coverage area (you can get it by  
means of inspecting the network signal  
intensity bar on the left top corner of the  
screen.) and you can make emergency calls  
without SIM card.  
112 is the standard GSM emergency  
number, which can be used by any GSM  
network in the world.  
2.7 hiding the call  
Attention: after opening the function of  
recording, the alteration of hand-free  
canceling the hand-free cannot be fufilled.  
When the customers use the phone to  
receive or dial calls, they can press the  
HOME key to hide the phone number. It is  
convenient for the customers to get other  
operations. (Some applications colliding with  
 
the selected number more large and the  
bright more light. Press left soft key (or click  
‘save’ of in the soft key indicator by  
touch-pen) to save your set.  
Operation of menu  
1. Setting menu option  
1.1 Phone setting  
1.1.1 Language setting  
1.1.4 Greetings  
There are ‘Chinese simple’ and ‘English’  
options in language set menu, press OK key  
(or click option with touch-pen) to select you  
desired language, and then press left soft  
(or click ‘save’ in the soft key indicator by the  
touch-up) to store, the language will be  
changed into the desired language.  
1.1.2 Backlight  
This function allows you to set the length of  
time the backlights in your mobile phone, set  
respectively ‘5s, 10s, 15s, 30sand 60s. You  
can select according to the need. Press left  
soft key (or click save option in soft key  
indicator by the touch-pen) to save your set.  
When the mobile phone stops working, and  
the selected time coming, the backlight will  
turn off automatically.  
After activate ‘greetings’ option you can  
input desired greetings, then press left soft  
key (or click ‘save’ icon in indicator by the  
touch-pen) to save the greetings. Once  
switch on your phone the greetings will be  
shown in the screen. If you don’t activate  
feature, the greetings won’t be shown when  
the power is on.  
1.1.5 Auto power on  
You can select auto power on option and  
input the power on time, then press left soft  
(or click save icon in the soft key column by  
the touch-pen) to save your set. When your  
phone is in turn off state until set time arrive  
your phone will automatically power on.  
1.1.6 Auto power off  
You can select auto power off option and  
input the power off time, then press left soft  
1.1.3 Brightness  
Adjust phone’s brightness in 01-09 ranges,  
 
(or click save icon in the soft key column by  
the touch-pen) to save your setting. When  
your phone is in power on state until the set  
time arrive your phone will automatically  
power off.  
be back to setting screen, otherwise, you will  
be instructed as followed: “too much errors,  
try again!”  
1.1.10 Reset  
When you select this option, you will be  
instructed: “Reset?’ When you select  
‘confirm’ press OK key (or click ‘OK’ by  
touch-pen) the screen instructed ‘Reset  
successfully’. Your phone will reset: the  
phone set, screen set, sound set, profile set,  
as well as SMS firewall and phone firewall  
option of in the security menu, reset them to  
default.  
1.1.7 Input set  
There are Pinying, English, 123digits and  
stroke input methods in the ‘input set’ menu,  
and you can accord your need to select.  
Press left soft (or click save icon in the soft  
key column by the touch-pen) to save your  
setting.  
1.1.8 Hotkey  
According your need to set each digit as well  
as set single dial and quick dial. In idle mode  
press and hold digit key will dial phone  
number directly or show your setting  
information.  
1.19 Touch setting  
When touch errors appear, you can enter  
the touch setting to correct them. Click the  
1.2 Sound set  
1.2.1 Call ring type  
1. Ring volume  
Press left/right of navigation key to adjust  
ring volume, as well as press left key to  
decrease volume and press right key to  
increase volume.  
2. Ring  
Selected the Ring option and press left soft  
key (or click save icon in soft key indicator  
center of  
correctly, then the window will  
 
by touch-pen) to save it. There is ring tone  
notifying you when a call coming.  
3. Vibrate  
Selected the vibrate option and press left  
soft key (or click save icon in soft key  
indicator by touch-pen) to save it. When a  
call is coming, the mobile phone will vibrate.  
Otherwise, the phone will be mute.  
4. Glint  
hasn’t glint feature.  
1.2.3 MMS ring  
The MMS ring set same as the incoming  
ring. But there is difference from: this option  
hasn’t glint feature.  
1.2.4 Alarm  
The alarm ring set same as the incoming  
ring. But there is difference from: this option  
hasn’t glint feature.  
Selected the glint option and press left soft  
key (or click save icon in soft key indicator  
by touch-pen) to save it. There are three  
lights, red, blue and purple. which will notify  
you when a call is coming.  
1.2.5 Power on ring, Power off ring,  
Calendar, Key tone, Connected, Low battery  
and Touch pad tone.  
When select one option of them and press  
left key (or click save icon in soft key area  
with touch-pen) to save it. Those  
corresponding option can ring; otherwise,  
5. Music select  
In music select menu press OK key (or click  
with touch-pen) to enter ring list option menu, then do not have ring sound.  
you can select incoming ring type, as well as  
select downloaded ring from ‘ring world’  
website.  
1.2.2 SMS ring  
The SMS ring set is same to the incoming  
ring. But there is difference from: this option  
1.3 Screen set  
1.3.1 Screen theme  
Select the ‘screen theme’ option to press OK  
key (or click with touch-up), your phone can  
bounce out a list for select screen colors,  
you can selecting fond color ‘Blue Sea’,  
 
‘Gold Times’, ‘Coffer Aroma’ and ‘Cyan  
Fruitage’ and so on.  
1.3.2 Wallpaper Select  
selected, the selected type will showed in  
the idle screen. If you select any one of the  
wallpaper, scroll bar, week, the gregoria,  
time and Chinese cale options, the selected  
option will be shown according, otherwise,  
will be not shown.  
Select the Wallpaper select option to press  
OK key (or click with touch-up) to enter  
‘picture list’, and press up /down of  
navigation key (or with the touch-pen to roll  
up/down the strip) to select picture fond,  
when you selected the desired picture, there  
are indicator ‘wallpaper setting?’ be showed  
you; if you press OK key (or click OK with  
touch-pen) to confirm, the wallpaper will  
switch to the selected picture; if you press  
right key move the cursor to ‘cancel’ option,  
and then press OK key (or click ‘cancel’  
button with touch-pen), the wallpaper is no  
change.  
1.4 Call set  
1.4.1 Call wait  
Using the call wait feature, during calling the  
incoming’s showed in the screen.  
1.4.1.1 Activate call wait  
Press left soft key (click the ‘activate call  
wait’ option with touch-pen) to select  
‘activate call wait’, and the screen show  
‘connecting’ and then the screen will show ‘if  
operating successful’.  
1.4.1.2 Cancel call wait  
1.3.3 Idle screen setting  
Press left soft key (click the ‘cancel call wait’  
option with touch-pen), to select ‘cancel call  
wait’, and the screen show ‘connecting’ and  
then the screen will show ‘if operating  
successful’.  
In idle type options including four types:  
digital, analog, monthly view and world time.  
You can press up/down key (or click ‘option’  
with touch-pen) to select, and press left soft  
key (or click ‘save’ with touch-pen) to save  
1.4.1.3 Inquire status  
 
Press left soft key (click the ‘inquire status’  
option with touch-pen) to select ‘inquire  
status’, and the screen show ‘connecting’  
and then the screen will show ‘if operating  
successful’.  
feature to input the new number in input box.  
1.4.2.1.2 Inactivate call  
Press left soft key (or click this option with  
touch-pen) select this option, and the screen  
show ‘in connecting’ and then the screen will  
show ‘if operating successful’.  
1.4.2 Call forward  
When activate the ‘call forward’ option you  
can select different type of call forward as  
well as you can set the forward number.  
1.4.2.1 Unconditional  
After you activate this option, you can  
forward all incoming call to other phone  
number.  
1.4.2.1.3 Inquire status  
Same as inquire call wait status, press left  
soft key (or click this option with touch-pen)  
to select this option, and the screen will  
show ‘connecting’ and then the screen will  
show ‘if operating successful’.  
1.4.2.2 When no reply  
1.4.2.1.1 Activate call  
Basic operating of this option same as the  
Press left soft key (or click this option with  
touch-pen) to select this option you can  
enter the screen of input box, and after input  
the desired number press left soft key (or  
click with touch-pen) to confirm it and the  
screen show ‘connecting’ and then the  
screen will show ‘if operating successful’.  
If you wand to change the forward number,  
only need you activate the call forward  
‘unconditional’,  
please  
reference  
unconditional option. When you activate this  
feature, you must select delay times.  
1.4.2.3 When busy  
All feature of this option same as the  
unconditional feature.  
1.4.2.4 When failing to connect  
All the operations here are the same to those of  
Unconditional.  
 
1.4.2.5 Cancel All Call Forwards  
touching pen to click] to able or to disable.  
Then the setting will take effect when the  
password is input.  
1.4.3.1.2 International Calls  
Similar to “All Outgoing Calls”  
1.4.3.1.3Home Calls Only  
Similar to “All Outgoing Calls”  
1.4.3.2 Incoming Call Bar  
This function is to limit the incoming  
calls.  
Press the left soft key [or click with the  
touching pen the ‘choice’ in the hint area] of  
“Cancel all the forwards”, then comes a  
message frame saying ‘connecting the  
network’; after having connected, another  
hint will come out to conform. Once it is  
conformed, all forwards are going to be  
cancelled, including “Unconditional”, “No  
Reply”, “When Busy” and “Not Reachable”.  
1.4.3 Call Bar  
1.4.3.2.1 All Incoming Call  
This function can optionally bar the incoming  
or outgoing calls.  
Similar to “All Outgoing Calls Bar”  
1.4.3.2.2 Roaming Calls  
1.4.3.1 Outgoing Call Bar  
Dialing Bar can limit the outgoing calls.  
1.4.3.1.1 All Outgoing Calls  
Press the left soft key [or click with the  
touching pen the “Choice”] to choose the  
option of “Barring All Outgoing Calls”, and  
then there are two choices “Able” and  
“Disable”. You can use the Up-and-Down  
button [or use the touching pen to click] to  
move the focus; then press “OK”[or use the  
Similar to “All Outgoing Calls Bar”  
1.4.3.3 Cancel Call Bar  
The password is needed if you want to  
cancel all bars. Once Call Bar is cancelled,  
all the settings about outgoing and incoming  
calls will be cancelled.  
1.4.3.4  
Change PIN Bar  
Similar to changing the password of  
“Security Firewall” in “Security Set”, first you  
need to type in the old password, then you  
 
can enter the screen of setting a new  
password; then you need to type in the  
same password twice to finish changing.  
1.4.4 Auto Redial  
with touching pen] to choose “Auto Answer”  
option, and then press the left soft key [pr  
click with touching pen] to save it.  
1.4.6 Open Answer  
If this function is enabled, a hint will jump out  
to the screen to inquire whether to redial  
later when there is no reply to your outgoing  
call. If you choose “Redial”, it will keep on  
redialing for ten times before ending. If you  
do not choose “Redial”, the calling is ended.  
To enable Auto Redial, you only need to  
press “OK”[or click with the touching pen] to  
choose “Auto Redial”, and then press the left  
soft key [or click with touching pen the  
“Save” key] to end your set.  
When this feature is enabled, you just need  
to open the cell phone to answer any  
incoming call. To enable this function, you  
just need to press OK [or click with touching  
pen] to choose “Open Answer” Option, then  
press the left soft key [or click the “Save”  
with touching pen] to save it. Then Open  
Answer is enabled.  
1.4.7Anykey Answer  
When this function is enabled, besides the  
usual way of answering, it’s also ok to press  
keys 1 to 9, *key, or #key. To enable it, you  
just need to press OK [or click with touching  
pen] to choose “Anykey Answer” option,  
then press the left soft key [or click with  
touch-pen “Save”] to save it.  
1.4.8Time Hint  
When this function is enabled, there will  
be a hint at the point of 50 seconds in talking.  
1.4.5 Auto Answer  
When this function is enabled and the  
earphone is inserted, the incoming call will  
be answered automatically after the call has  
lasted for more than 5 seconds (the Auto  
Answer Time). Auto Answer is only  
applicable to earphone. In setting Auto  
Answer, you just need to press “OK”[or click  
 
To enable it, you just need to press OK [or  
click with touch-pen] to conform “Time Hint”  
option, and then press the left soft key [or  
click with touch-pen] to save it.  
choose “To Home”; here the user can set as  
his wish the home phone number, “Back  
Time” and “Mode”. After set, press “Save” to  
save the set or press “Cancel” to go back to  
the up menu.  
1.4.9 Hide Code  
When this function is enabled, your cell  
phone number will be hidden from the  
phone’s screen that you are calling. To  
enable it, you just need to press OK [or click  
with touch-pen] to choose “Hide Code”  
option, and then press the left soft key [or  
click with touch-pen] to save it.  
Note: This function needs the support  
from the network.  
1.5 Call Forward  
1.5.1.3 Effect  
1. After setting “To Home” and “Back  
Time” ----give the key of 3 a long  
press, then conform to effect “To  
Home”.  
2. If not yet set “To Home” or “Back  
Time”--- give the key of 3 a long  
press to conform, and a hint will  
appear that the “To Home” or “Back  
Time” is not yet enabled, and you  
need to enter the Call Forward to  
pre-set.  
1.5.1 To Home  
1.5.1.1 Function Introduction:  
If the user has enabled “To Home” at  
the present time, all the incoming calls will  
be forwarded to the home telephone within  
the set “Backtime” in the set “mode”.  
1.5.1.2 Set  
1.5.1.4 Cancel  
Enter “Call Forward” in “Call Set” and  
conform “ Cancel All Forwards”  
1.5.2 To Company  
1.5.2.1 Function Introduction  
Enter the Option of Call Forward and  
When the user enable “  
To  
 
Company” at the present time, all  
incoming calls will be forwarded to the  
company’s phones within the “effective  
time”.  
Enter “Call Forward” in “Call Set” and  
conform “ Cancel All Forwards”  
1.5.3 To Others  
1.5.3.1 Function Introduction:  
1.5.2.2 Set  
When the user enable “ To Others”  
at the present time, all incoming calls will  
be forwarded to the set phones within the  
“effective time”.  
After entering “Call Forward” and  
choosing “To Company”, the user can set  
as his wish “the company number” and  
“Effective Time”. Then press “Save” or  
“Cancel ” to go to the up menu.  
1.5.2.3 Effect  
1. After setting “To Company” and  
“Time” ----give the key of 6 a long  
press, then conform to affect “To  
Company”.  
1.5.3.2 Set  
After entering “Call Forward” and  
choosing “To Others”, the user can set as  
his wish “the other number” and  
“Effective Time”. Then press “Save” or  
“Cancel ” to go to the up menu.  
1.5.3.3 Effect  
2. If not yet set “To Company” or  
“Time”---give the number 6 a long  
press, after conforming, a hint will  
inform you that the “To Company”  
and “Time” hasn’t been set, and you  
need to enter Call Forward to  
pre-set.  
1.After setting “To Others” and “Time”  
----give the key of 9 a long press, then  
conform to affect “To Company”.  
2.If not yet set “To Others” or  
“Time”---give the number 9 a long press,  
after conforming, a hint will inform you  
that the “To Others” and “Time” hasn’t  
been set, and you need to enter Call  
1.5.2.4 Cancel  
 
Forward to pre-set.  
1.5.3.4 Cancel  
Check”.  
After the SIM card is installed correctly,  
Enter “Call Forward” in “Call Set” and  
conform “ Cancel All Forwards”  
Note:  
1. All the set numbers must be cell phone  
numbers or the telephone numbers with  
district number ahead; otherwise the  
long press of the key 3,6 or 9 will fail to  
effect.  
press the left soft key [or click with  
touch-pen] to choose “Turn on PIN Check”  
or “Turn off PIN Check”, then the user needs  
to type in the correct PIN to turn on or off the  
PIN Check; but there are only three chances  
to check. If a wrong PIN is input three times,  
the SIM card will be locked, and the PUK will  
be needed. In this case, please contact the  
SIM card provider.  
2. If this function lap over the  
Unconditional, the one set later comes  
to effect.  
If no SIM card, a hint will inform that  
“please check the SIM card!”  
3. If the cell phone is turned off, the “Time”  
will not be extended after the phone is  
turned on.  
If the PIN Check is already turned on, the  
hint will note you to input the PIN.  
1.6.2 Change PIN  
4. The changing of “Back Time” will be  
invalid after enabling Call Forward.  
1.6 Security Set  
After the SIM card is correctly installed and  
the PIN check is turned on, press the left  
soft key [or click with touch-pen] to choose  
“Change PIN”. Then the user has to input  
the old correct PIN, then the new PIN twice  
which must contain 4 to 8 numbers. If a  
wrong PIN is input three times, SIM card will  
1.6.1PIN Check  
When the PIN is off, the first option in the  
screen will be “start PIN check”, and when it  
on, the first option will be “turn off the PIN  
 
be locked.  
1.6.3 Change PIN2  
It’s similar to Change PIN, and please refer  
want to delete a spam number, you need to  
choose the “Delete Option” in the menu.  
1.6.4.2 Phone Fire Wall  
1.6.4.2.1 Fire Wall Settings  
to Change PIN。  
“Black List On”: the numbers in the Black  
List cannot call in. when the black list is  
empty, it’s not allowed to turn on the Black  
List.  
1.6.4 Fire Wall  
After the SIM is changed, all settings in Fire  
Wall will be saved.  
1.6.4.1 SMS Fire Wall  
“White List On”: Only the numbers in the  
white list can call in. when the white list is  
empty, it’s not allowed to turn on the white  
list.  
“Off”: to turn off the Fire Wall and any  
number can call in.  
“Spam Activating”: all SMS from the  
numbers on the SMS Spam List will be  
directly thrown into the trash. But when the  
SMS Spam List is empty, it’s not allowed to  
enable “Spam Activating”.  
“Mobile phone Only”: all SMS from the  
numbers without the beginning as (+86) 13,  
will be directly thrown into the trash.  
“Off”: Turn off the SMS Fire Wall.  
1.6.4.1.2 SMS Spam List  
If the user put a mobile phone number in  
the SMS Spam List, then all SMS from this  
number will be directly thrown into the Trash.  
Either input or choose from the “Phone list”  
the numbers to add to the Spam List. If you  
1.6.4.2.2 The Black List  
When entering the black list, the menu  
in the soft key area offer three options:  
“Phonebook”, “Manual Input” and “Delete”.  
The user can either choose from the  
phonebook or manually input numbers into  
the black list; if the user wants to delete  
some numbers, he just needs to press  
“Delete” to remove the chosen numbers.  
 
1.6.4.2.3 the White List  
is to be input twice to become valid.  
When entering the white list, the menu  
in the soft key area offers three options:  
“Phonebook”, “Manual Input” and “Delete”.  
The user can either choose from the  
phonebook or manually input numbers into  
the white list; if the user wants to delete  
some numbers, he just needs to press,  
“Delete” to remove the chosen numbers.  
1.6.4.3 Security Fire Wall  
1.6.5 Reset  
When you choose “Reset”, you first need  
to input the right reset password, then the  
security firewall password (mobile phone  
password) will become “0000”, and also all  
the settings in the security firewall will be  
turned off.  
1.66 U-disk Clean Up  
When you choose “U-disk Clean Up”,  
you will then see “this operation will delete  
all the files in the user’s data, please make a  
copy first. Continue? ” If you choose OK [or  
click with touch-pen], the U-disk Clean Up  
will start. Press the key of right to move the  
cursor onto the button “Delete”, then press  
OK [or click “Cancel” with touch-pen] to turn  
off the message frame. The user should  
finish the copy (copy all the contents in the  
user’s data to a PC). You can’t cancel when  
the copying is gong on. After finishing, there  
will be a sign to indicate whether the  
cleaning up is a success or not.  
1.6.4.3.1 Fire Wall Settings  
You have to manually input the mobile  
phone password to set the password to the  
application. The applications that can be  
given passwords include “phonebook” ‘SMS’  
“Color SMS” “Email” “Call Records” and  
“turning-on password ”. The application  
password is the mobile phone password.  
1.6.4.3.2 Change Password  
To change the password, you need to  
input the old password correctly (initial  
value:0000), then you can be allowed to  
input the new password. The new password  
 
Note in particular:  
the mobile phone shows; the legal scope is  
between 0-23.  
Minute--- input the number of minute of the  
time the mobile phone shows; the legal  
scope is between 0-59.  
1. U-disk Cleaning Up will format (empty)  
“the user’s data”, so make copies before  
cleaning up(copy all the files in the user’s  
data to a PC). You are suggested to  
carefully use this function.  
Second---- input the number of minute of the  
2. The format of the mobile phone on a pc, time the mobile phone shows; the legal  
or a long time use of the mobile phone as a  
memorizer, will both affect the quality of  
camera. After the U-disk cleaning up, the  
quality of camera can recover. If the user  
finds an evident decline in the camera’s  
quality, just use this tool to improve it.  
1.7 Time  
scope is between 0-59.  
Year---- input the number of year of the date  
the mobile phone shows; the legal scope is  
between 1970-2035.  
Month---- input the number of month of the  
date the mobile phone shows; the legal  
scope is between 1-12.  
The screen shows two time zones, and the  
user can set the time and date, and also  
check the time and date throughout the  
world. This feature allows the user to get the  
accurate time when traveling around the  
world. When the user is going to travel  
abroad, he can get the time of the  
destination and at home as well.  
Day---- input the number of day of the date  
the mobile phone shows; the legal scope is  
between 0-31.  
Time zones----press “OK” to pull down the  
frame, then use the up-and-down key to  
choose [or click with touch-pen the time  
zone ] to choose a time zone.  
Notes: Only if you press the left sot key [or  
click with touch-pen to press “Save”] to save  
Hour----input the number of hour of the time  
 
your settings. Other ways such as cutting off  
the power, pushing the hanging up key and  
home key won’t save it.  
Once ” and “Step By Step”.  
Use the up-and-down button [or click  
with touch-pen] to choose the Mode and  
Ring, then press OK [or click with touch-pen]  
to conform, then choose “Save” in the menu  
of the soft key to start your mode.  
[The operations above can all be  
conducted by using the touch pen]  
1.8.2 Editing the Mode  
1.8 Profiles  
Profiles are a group of definitions of  
the mobile phone’s ring-music, and it is easy  
to turn on. The mobile phone offers a set of  
modes, including: “normal mode” “outdoor  
mode ” “meeting mode” and “silent mode”.  
For each mode, this is a set of value. The  
user can change and save the mode as he  
likes.  
The user can choose “Edit” in the  
menu to set the parameters under different  
modes.  
Meanwhile, the user can rename the  
mode as he or she likes.  
1.8.1Turn on the Mode  
1. Call: press up-and-down button [or  
click with the touch-pen] to choose “ring of  
call”, then press OK [or click with touch-pen]  
to enter the editing screen of the ring type of  
call. Press up-and-down button [or click with  
the touch-pen] to choose “ring volume”,  
“way of call” and “music”; use the  
left-and-right button [or click with touch-pen]  
to adjust and set the right ring volume;  
“Ways of Call” consists “Ring” “Vibrate” and  
“Glint”; if you choose all of them, then they  
When having chosen the appropriate  
mode, choose “Save” key in the menu of the  
soft key area, now the mobile phone’ ring  
music is set by the chosen mode.  
“Profiles” has four defaults: “normal  
mode” “outdoor mode ” “meeting mode” and  
“silent mode”, and it also has four kinds of  
rings which include “Consecutive R” “Ring  
 
will work together; As the “Glint” is on, the  
glint lights including blue, red and purple will  
be shining. The default value of “Glint” is  
“on” in all four modes. Choose “music” and  
then press OK [or click with touch-pen] to  
enter the ring music list. After choosing a  
song or music, press left soft key [click with  
the touch-pen] to save the setting, or press  
the button on the right side to cancel this  
setting and return to the up menu.  
2. SMS: its way of editing is quite similar  
to that of “Ring Style of Call” with only one  
difference: the SMS has no “Glint” option.  
3. MMS: its way of editing is quite similar  
to that of “Ring Style of Call” with only one  
difference: the SMS has no “Glint” option.  
4. Alarm: its way of editing is quite similar  
to that of “Ring Style of Call” with only one  
difference: the SMS has no “Glint” option.  
5. Power On: press up-and-down button  
[or click with touch-pen] to choose “the ring  
of power-on”, then press OK[or click with  
touch-pen] to conform “the ring of power-on”  
and to choose whether to turn it on or off.  
6. Turn Off: press up-and-down button [or  
click with touch-pen] to choose “the ring of  
power-off”, then press OK [or click with  
touch-pen] to conform “the ring of power-off”  
and to choose whether to turn it on or off.  
7. Calendar: press up-and-down button  
[or click with touch-pen] to choose  
“Calendar”, then press OK[or click with  
touch-pen] to conform “Calendar” and to  
choose whether to turn it on or off.  
8. Key Tone: press up-and-down button  
[or click with touch-pen] to choose “Key  
Tone”, then press OK[or click with touch-pen]  
to conform “Key Tone” and to choose  
whether to turn it on or off.  
9. Connected: press up-and-down button  
[or click with touch-pen] to choose  
“Connected”, then press OK[or click with  
touch-pen] to conform “Connected” and to  
choose whether to turn it on or off.  
10. Low Battery: press up-and-down  
button [or click with touch-pen] to choose  
 
“Low Battery”, then press OK [or click with  
touch-pen] to conform “Low Battery” and to  
choose whether to turn it on or off.  
11. Touch pad Tone: press up-and-down  
button [or click with touch-pen] to choose  
Touch pad Tone”, then press OK [or click  
with touch-pen] to conform “Touch pad  
Tone” and to choose whether to turn it on or  
off.  
1.9.2 Network Selection  
To select how the mobile phone search  
and connect the network, including “auto  
search” and “manual search”.  
“auto search” :press the left soft key[or  
click with touch-pen] to choose “auto  
search”, then enter the searching screen  
which shows  
normal or not.  
whether the network is  
12. Key Volume: press up-and-down  
button [or click with touch-pen] to choose  
“Key Volume”, then press OK [or click with  
touch-pen] to conform “Key Volume” and to  
adjust and choose the right volume.  
1.9 Network  
“manual search”: press the left soft key[or  
click with touch-pen] to choose “manual  
search”, then enter the searching screen  
which shows the network list available,  
through which a mobile phone can be  
registered in a normal network.  
Examine and adjust the settings of  
network  
1.9.1 Dial-Up Type  
Three default types: “GPRS-WAP”,  
“GPRS-NET”, “CSD-WAP”; the user can  
also define the dial type.( detail information  
about its function in wap browser)  
“preferred network”: press the left soft  
key[or click with touch-pen] to choose  
“preferred network”, then the preferred  
network list arrears. The main network of the  
user usually top the list with others arranged  
in an order.  
“preferred added network”: in the screen  
of the preferred network, choose the key  
 
“Add” in the menu, then you can see several  
networks in the screen, from which you can  
choose some to add to your preferred  
network list.  
“Delete Preferred Network”: in the screen  
of the preferred network, you choose  
“Delete” in the menu to enter the deleting  
screen, then you can choose some to  
delete.  
saved and those old ones deleted.  
When the mobile phone is on but the  
password of “Security FireWall” and “Call  
Record” in the Security Settings is off, press  
the calling key to see the latest outgoing  
calls, ( if the password of “Security FireWall”  
and “Call Record” in the Security Settings is  
on, then the password is needed to check  
the call records).  
(Operations above can also be practiced  
by using touch pen)  
2.Communication Menu Application  
2.1Call List  
In Call List, you can find the missed calls,  
outgoing calls and incoming calls with their  
exact call time, date and the length of call  
time. The Call List has other functions such  
as recording the calling, saving numbers  
and deleting records, ect. They can be  
When the mobile phone is on but the  
password of “Security FireWall” and “Call  
Record” in the Security Settings is off, press  
the up key to see the missed calls in the “call  
record”, (if the password of “Security  
FireWall” and “Call Record” in the Security  
Settings is on, then the password is needed  
to check the call records).  
Press the left key to enter the main menu  
screen, and choose “call record” application,  
then press OK to enter it. There are three  
types of contents in “Call Record”: missed  
calls, outgoing calls and incoming calls.  
Users can check the names, numbers, the  
divided into three classes:  
“Missed”,  
“dialed” and “Answered”. Each can save  
as many as 20 pieces of records. When the  
room for records is full, the new ones will be  
 
time of calls, the dates of calls and the  
lengths of calls, of the recent missed  
calls(without the call times ), outgoing calls  
and incoming calls.  
“Send SMS”: to send short messages to the  
chosen numbers.  
“Set Black”: to put the chosen number into  
the black list;  
2.1.1  
2.1.1.1  
Recent Calls  
Missed calls  
“Set White”: to put the chosen number into  
the white list;  
In the call list, the missed call is  
defaulted. Entering the Missed Call, you can  
choose from the menu of the left soft key the  
functions to operate the missed calls, such  
as “call”, “save”, “IP call”, “send message”,  
“set black”, “set white”, “call time” and  
“delete”.  
“Call Time”: to chick the call time, the total  
time of the outgoing calls and incoming  
calls;  
“Delete”; to delete the useless records.  
2.1.1.2 Outgoing Calls  
Operations similar to those of Missed Calls  
2.1.1.3 Incoming Calls  
You can press OK[or double click the  
option with the touch-open] to check the  
details of the chosen call records, including  
the names of the callers (if the phonebook  
has the number), the number of the call, the  
call time and the date of the call.  
Operations similar to those of Missed Calls  
2.1.2Delete Records  
In the call records, choose the button  
“Delete” in the menu, then press the  
up-and-down button [or click with touch-pen]  
to delete what you want to delete. Then  
press OK to choose the record, press left  
soft key [or click “Delete” with touch-pen],  
the mobile phone will give a hint, then press  
the OK [or click “Conform” with touch pen] to  
“Call”: to dial the chosen number;  
“Save”: to the number into the phonebook;  
“IP Call”: to dial the IP number plus chosen  
number;  
 
conform; press the button of right to move  
the cursor onto “Cancel” then press OK[or  
click “Cancel” with touch-pen ] to cancel the  
operation.  
If you want to delete a certain piece of  
record, you can move the cursor on this  
record and then choose “Delete” in the  
menu. Press OK to delete this record.  
2.1.3 Call Time  
the records can be grouped, for instance,  
friends, schoolmates, SIM and so on. And  
they can also be personally grouped. SIM is  
very special, because its record can only  
consist of one phone number. Its capacity is  
determined by itself. The other records  
grouped can matched with big-head-photo,  
several numbers, birthday, email address,  
the address of the company and gender, ect.  
2.2.1The introduction to the screen  
In the Call Record, choose the “call time”  
in the menu, enter the call time screen. Here, 1. Choosing the groups of records on the  
you can see the call time of last call, the total  
time of outgoing and incoming calls.  
You can press left soft key [or click “Return  
to Zero”] to reset the call time as zero, then  
press the right soft key [or click “Return” with  
touch pen] to exit call time.  
main screen of phonebook, then you can  
see all the records in each group.  
2. Clicking with the touch-pen the letters  
on the right side of the screen will let the  
users find the records, and it works as well  
as pressing keys,  
2.2 Phonebook  
2.2.2Update the records  
The functions of Phonebook include “New”,  
“Call”, “IP Call”, “Send SMS”, “Send Color  
SMS”, “Search”, “Group Setting”, “Status”,  
“Copy”, “Delete Record” and “IP Setting”.  
In the “phonebook” of this mobile phone, all  
Users can choose “New” in the menu of the  
soft key, or use the touch-pen to click the  
“New” key in the up right part, to enter the  
grouping screen of “New with the big-head  
photo as the default picture.  
 
Users can change their big-head photos as  
their wish and do not forget to conform.  
Users can change and update the record  
group according to their own demands. To  
do that, you just need to move the cursor on  
the “Grouping Options”, the press OK [or  
click with touch pen] to choose the  
appropriate grouping, then press the left soft  
key [or click “save” with touch-pen] and it’s  
finished. If “SIM Card” is chosen, only one  
number can be input and no big-head photo.  
In the “New” screen, the number editing  
frame can only be input into numbers while  
the other frames can be input characters,  
special signs and so on. But, there is a limit  
to size of every editing frame, for example,  
the number editing frame can at most hold  
30 numbers.  
2.2.3  
Alter records  
First choose the record then enter the  
screen of altering. After altering, the user  
must press the left soft key [or click with  
touch-pen] to save, then can the contents  
be saved. If the user chooses directly  
“Cancel”, the altered record will not be  
saved.  
2.2.4  
Look up the record  
After entering the phonebook, choose “look  
up” of the menu, you will find the different  
types as followings:  
1.By the initial letter  
When the name the users has input are  
Chinese characters, the user need only to  
input the initial letter of the character. If the  
name is English, input the English letter with  
the initial letter first and with intervals of  
non-English-letter signs to look up. If the  
name is a mixture of characters and English  
letters, use the first one as the criteria. If the  
first one the user inputs is a special sign,  
then there will be no result by means of  
No matter whether to alter or to open a new  
record, the user need to press the left key  
[or click with touch pen] to save it after input.  
If the user press “Cancel” directly, the  
contents won’t be saved.  
 
looking up through initial letter.  
Here is an example:  
Move the cursor onto the “group” of the  
looking up screen, and then press OK to  
open the grouping menu, then use the  
up-and-down to search the grouping you  
want, press Ok and add the grouping to the  
grouping place, then choose “look up”, the  
screen will show all the records you want.  
3.Field Look Up  
Fields include: telephone number, name,  
sex, birthday, company, tax number,  
operation, fax, email, address and remark.  
The default field is telephone number.  
After choosing the field, input the  
corresponding contents, to look up by the  
key words can find the records relevant.  
Besides, if the name is chosen, the content  
editing frame will show “Male” “Female” for  
the users to choose.  
If the name is “欧阳春雪”, the user should  
input “o” to look up; and inputting o and y is  
also ok, so is inputting O,C,Y or O,Y,C,X. IF  
no letter o, or only O,C, or only O,X, no  
result can be found.  
When the name is “Jack Smith”, inputting  
J or J and S will lead to the name; if only  
inputting S, no result.  
When the name is “Jack Smith”, inputting  
J or J and S will lead to the name; if only  
inputting S, no result.  
When the user input “Jack Smith”,  
inputting J or J and S can be ok, ,if only  
inputting S ,no result.  
When the user input “欧 Jack ”  
Inputting O or inputting O and Y can be ok.  
But if only Y, no result  
When the name is “%欧阳”, in this case,  
this initial way won’t work.  
Note: three ways of looking up are  
actually the same kind.  
2.2.5 Manage By grouping  
Choose “Manage by grouping” in the  
phonebook and enter the screen of  
2.look up by group  
 
management by grouping. Management by  
grouping refers to set up different kinds of  
records and incoming call rings and  
the touch-open] to enter the screen of  
grouping icon. If the user wants to choose  
an icon, he just need to move the cursor to  
the icon, then press OK [or click with the  
“phonebook”.  
Another  
function  
of  
management by grouping is to add grouping; touch-open].  
the user can define 16 groups.  
3. Adding grouping  
1. Alter grouping ring styles  
Choose “grouping management ” in the  
phonebook screen, then press the left soft  
key[or click with the touch-pen] to enter the  
adding grouping screen. Then you need to  
input the name of grouping in the “grouping  
name” editing frame, then choose grouping  
rings and grouping icon. If you want to edit  
the added grouping, you just need to choose  
“Edit” to enter “delete” in the hint menu to  
delete the added grouping.  
In altering grouping ring styles, you first  
need to choose the groups you are going to  
alter, then move the cursor onto “grouping  
ring styles”. Then press OK [or click with  
touch-pen] and enter “ring style” screen. The  
user can choose the ring as his wish.  
Another special ring is “default ring” option.  
If the user chooses “default ring ”, the  
incoming calls will correspond with the rings  
in the sound settings.  
Note: if you have deleted the added  
grouping, the records of this grouping will  
return to its default value.  
2. Altering Grouping Icon  
In altering the grouping icons, you just need  
to open what you choose (the way of  
opening is the same as altering grouping  
ring styles), then move the cursor onto the  
grouping icon, then press OK[or click with  
2.2.6Call the Present Record  
Method1: choose a record with a  
number, and then enter the calling screen to  
start calling the chosen number. If the  
 
number is a mobile phone’s number, the  
big-head photo, name, number will appear;  
if the number is a SIM record number, only  
appear name and number.  
Method2: choose a record with a  
number, press OK [or click with touch-pen]  
to enter the browsing screen, then enter  
calling screen to call the chosen numbers.  
When you choose IP call, you call the  
IP number and your chosen number  
together; you have to set an IP number  
before call it. You can find ‘IP set” in the  
main menu.  
Choose a record with an email address,  
press OK [or click with touch-pen]to enter  
the present browsing screen, then choose  
“send the email” to enter the email editing  
screen.  
2.2.9 Send a recorded number color to  
SMS.  
Method1: choose a record with a number,  
then choose “send color SMS ”, to enter  
email editing screen.  
Method2: choose a record with a number,  
then press OK [or click with touch pen] to  
enter the browsing screen, to enter  
email-editing screen.  
2.2.7Send a Record to SMS  
Method1: choose a recorded number, then  
choose “send SMS” in the menu to enter the  
SMS editing screen.  
Method2: choose a recorded number, press  
OK [or click with touch pen] to enter the  
browsing screen, then choose “send SMS”  
to enter the SMS editing screen.  
2.2.10 Copy records  
Choose “copy to card” or “copy to mobile  
phone” to enter the copying screen. The  
specific ways as follows:  
Method1: in the browsing screen, choose  
“copy to card” or “copy to mobile phone”  
then to enter the copying screen.  
Method2: in the browsing screen, choose  
“copy to card” or “copy to mobile phone”  
2.2.8Send a record to email  
 
then to enter the copying screen.  
Note: the records in the mobile phone can  
only be copied into SIM card; records in  
SIMcard can only be copied into mobile  
phone.  
this record to Mobil phone number, some  
files will be lost. Because the mobile  
phone record can save a lot of information,  
and you must be careful!  
2.3 the e-mail  
2.3.1 the setting of the account  
2.2.11 Deleting Records  
1. You can use the account key in the  
menu of the soft key to enter the  
account list screen (the list is empty  
when you first enter)  
2. You can use the new key in the menu to  
enter the new creating account screen.  
It is empty when you first enter.  
Pressing the left soft key(or use the  
touching pen to touch the new  
key)enter the new creation screen. After  
inputting the correct the content, you  
can use the left soft key (or touch the  
save) to store the account.  
You can use the grouping deleting way to  
delete records. You just need to choose the  
records, and then choose “delete” in the  
menu to enter the deleting screen. The  
specific ways as follows:  
Method1: in the browsing screen, choose  
“delete”.  
Method2: choose “delete ” in the main  
menu, then choose the records, then  
press the left key [or click with touch-pen]  
to delete.  
Method3: click the “delete” key in the right  
up part. You just need to move the cursor  
onto the records, and then click the key  
with touch-pen to delete.  
Warning: if you change a mobile phone  
number into a SIM card, and then change  
2.3.2  
Deleting the account  
You can select the account on the account  
list and press the delete key. The mobile  
phone will inform you with “deleting?” then  
 
you identify the account is deleted.  
2.3.3 Setting the default account  
You can press setting default key in the  
menu and choose an account on the  
account list. Then the account is set as  
default setting.  
2.3.6 Writing and sending mails  
1. You can enter the writing window by  
selecting the writing e-mail in the menu  
of the soft key. You can also use the  
touching pen to touch the writing key to  
enter it.  
2.3.4  
Modifying the account  
2. After inputting the address of the  
receiver, subject and the content, you  
can send the e-mail. It is not necessary  
to input the subject and the content, but  
you must input the receiver’s address.  
3. Selecting the receiver key on the new  
e-mail writing window, the address is  
activated to select the receiver.  
4. selecting save in the menu of the soft  
key , the writing e-mail can be stored.  
5. entering the additive list after selecting  
additive in the menu, you can press the  
additive key to choose which you want.  
Then the additive is appended by  
selecting the identification.  
If you want to enter the editing modifying  
window, you can choose an account on the  
list, then press the OK (or use the touching  
pen to touch the account)  
2.3.5  
1.  
the setting key in the menu of the soft key,  
you can press the rule key to the rule list.  
2.there are two default setting rules in the  
list. You can create the new one by pressing  
the new creation key in the menu of the soft  
key.  
The regulations of the mails  
Entering the setting window by using  
3. After  
choosing  
the  
appropriate  
conditions and the operations of rules.  
You can input the rule name and set up  
a new rule.  
2.3.7 receiving the mail  
1. choosing the default setting account in  
 
the list, you select the receive in the  
menu of the soft key. then all the  
e-mails of the account will be received  
normally.  
of finding the result. The list of e-mail will  
show the found e-mail.  
2.3.10  
deleting the e-mail  
1. using the touching pen to touch the  
quick “delete” icon on the main screen of the  
e-mail, you will be informed whether delete  
the e-mail at present or not.  
2. there are several accounts in the list. If  
you select receive all , the new mails of  
these accounts will be received.  
2.3.8  
reading the mails  
2. on the main screen of the e-mail, you  
can choose the “delete” in the “menu” in the  
warning area to enter into the deleting  
screen. Then you can delete several e-mails  
at the same time or them all.  
1. the mails can be read by pressing OK  
key at any mail box(or be touched twice  
by the touching pen)  
2. if the setting rule of the mail is  
downloading the head of the mail, then  
you can only read the brief information  
of the mai.  
2.3.11  
the dialing setting  
1. choosing the “set” in the “menu” in the  
soft button warning area on the main screen,  
you will get into the setting screen of the  
system of the e-mail. The e-mail can be sent  
and received by dialing through choosing  
the “dialing set” in the “menu” and the  
“GPPRS NET”.  
2.3.9 searching the e-mail  
1. On the main screen of the e-mail, you  
can choose the “finding” in the “menu” in the  
warning area to input the consulting  
conditions.  
2. Pressing the left soft button (or using  
the touching pen to touch the “enter” in the  
warning area), you can enter into the screen  
(The operations referred above can be  
realized by the touching pen)  
Notice: 1.in order to send and receive the  
 
e-mail successfully, the customers should  
open the GPRS of the SIM card and set the  
account correctly.  
The phone will tell you to input the phone  
number and the content if you do not input  
the receiver or content. And it will tell you  
that the receivers has been more than 50  
people.  
Notice: the number of receivers is no more  
than 50. the phone numbers should be  
secluded by the semicolon.  
The screen of the text editing is used to  
edit the content of the short messages.  
The menu can be used by pressing the  
menu button:  
1. “send”: sending the message currently  
edited.  
2. “insert daily words”: inserting the text of  
presupposed messages in relation with the  
subject will get you rid of the trouble of  
inputting much information.  
3. “saving into the drafting box”: the  
message can be reused in the drafting box.  
When the message is being sent, the  
phone will tell you that “sending”; if sending  
a message failed, it will tell you that  
2. Not  
choosing  
the  
SSL  
safe  
identification: setting the POP3 port with  
110, SMTP port with 25. then the e-mail will  
be sent and received in a normal way.  
3. Choosing the SSL identification: POP3  
port;9110 SMTP port:9025. the e-mail will  
be sent and received normally.  
2.4  
Short Message  
140 english letters and 70 chinese  
characters can be sent into the customers’  
mobile phones through the service center.  
The short message provides the following  
services: writing new messages, inbox,  
outbox, drafting mail box, saving mail box,  
sweeping box, daily words, parameter set,  
cell info broadcast, phone message.  
2.4.1 creating message  
the new message can be created by  
entering into the screen of editing the new  
message.  
 
“sending  
failed,  
resending?”,  
the  
The number of saving messages will be  
dependent on the phone and the SIM.  
The inbox saves all the received messages.  
Each one will have one icon to show  
whether it is read or not. The opened  
envelope means that it has been read;  
otherwise it has not. Choosing the OK (or  
using the touching pen to have a double  
touch on the selection)will read the  
message.  
unsuccessful sending message will be  
saved in the inbox.  
If it succeed in sending a message, the  
phone will tell you that sending ; whether it  
is successful or not ,the collective sending  
will show you a result; the sent messages  
will be saved in the inbox.  
2.4.2 Inbox  
while receiving a short message ,the  
phone will send a alert tone and save it into  
the inbox. And “ a short message” will  
appear on the screen to alert the  
customers. You can enter into in the inbox  
screen by pressing the OK (or using the  
touching pen to touch the message); then  
the phone can return to the screen by the  
C button. And the little envelope icon in the  
shortcut function will change its color to  
alert that there is a message to be read  
and save it into the phone or the SIM  
automatically. And the phone can reach the  
screen of the inbox by touching the icon.  
The menu can be activated by pressing the  
menu button,  
1.  
“reply”: replying the current short  
messages;  
2.  
“forward”: editing the current  
message on the screen and forwarding to  
other people;  
3.  
“delete”: deleting the current  
message, then returning to the inbox(the  
customers will be informed whether to  
delete it or not);  
4.  
“call”: calling the phone number of  
the current message;  
 
5.  
“save number”: saving the phone  
message  
and  
returning  
to  
the  
number of the current message into the  
address(it is as the same as to create a  
new address );  
outbox(identifying whether to delete or  
not);  
3.  
“call”: calling the number of the  
6.  
“move”: moving the message into  
current message.  
the saved box;  
4.  
“save”: saving the number into the  
7.  
“trash”: moving the message into  
address(It is as the same as to create a  
new address);  
the trash box. If the number is not trash  
through transferring the phone will tell the  
customers whether to set the number as a  
trash number or not.  
5.  
“move”: moving the message into  
the saved box.  
2.4.4 draft box  
8.  
“use number”: the customer will  
the draft is used to save self-defined,  
common-used and useful messages. Edit,  
delete, call, save number and move can be  
used in the soft button alert area.  
choose to save the number selected from  
message.  
2.4.3 outbox  
the detail of sent or unsent message can  
be got in the outbox.. the edit, delete, call,  
save and move can be used in your  
reading.  
1.  
“edit” entering into the screen of  
editing messages and editing the  
message.  
2. “delete”: deleting the current message  
and returning to the outbox(identifying  
whether to delete or not);  
1.  
“edit” entering into the screen of  
editing messages and editing the  
message.  
3. “call”: calling the number of the current  
message.  
2.  
“delete”: deleting the current  
 
4. “save”: saving the number in to the  
address (it is as the same as to create a  
new address);  
5. “move”: moving the message into the  
saved box.  
2.4.6 trash  
when the refusing the trash number is used  
in safety set. If the message is trash, it will  
be save into the trash directly. When it is  
full, the newly receiving message will cover  
the first message. delete, call and move  
can be used in the soft button alert area.  
1. “delete”: deleting the current message  
and returning to the draft(the customers  
will be informed whether to delete it or not);  
2. “call”: calling the number of the  
current message.  
2.4.5 saved box  
the saved box is used to save the  
messages from other boxers. Edit, delete,  
call, save number and move can be used  
in the soft button alert area.  
1.  
“edit” entering into the screen of  
editing messages and editing the  
message.  
2. “delete”: deleting the current message  
and returning to the outbox(identifying  
whether to delete or not);  
3. “move”: moving the message into the  
inbox.( if the inbox is full, it will tell you that  
operation failed).  
2.4.7 common use  
3. “call”: calling the number of the current  
message.  
4. “save”: saving the number in to the  
address (it is as the same as to create a  
new address);  
the frequently used words can be insert  
into the text directly. It can save time.  
2.4.8 parameter set  
setting the parameters of the message, such  
as “SMS center number”, “type”, ”location”,  
“validity”, result report, reply path, setting  
vocabulary.  
5. “move”: moving the message into the  
saved box.  
 
1. service center number  
settings.  
if providing the service ,the net agent  
provides SMS center number.  
2. location  
you can select a location to save the  
message. When it is full ,the phone will  
change into another location. The phone will  
not inform you that the inbox is full unless  
the two locations are full. You can choose  
to use phone or the SIM first.  
2.4.9 voice mail  
1. calling :calling the set center number.  
2. the center number: the menu can be  
used by the left soft button.  
3. saving: saving the set center numbe.  
4. address: you can choose the number  
from it or input the center number by  
yourself. You can also choose it from  
the address by pressing the center  
number.  
3. types of message  
you can choose SM, e-mail, voice and fax.  
4. validity period  
2.4.10 broadcast SMS  
1. reception: receiving all kinds of  
messages from the channel.  
2. list: activating the menu by menu.  
3. save: save the set menu.  
4. adding: adding new channel  
sets the length of time your message will be  
saved in the SMS center:1 hours, 1day,  
1week, 1 month, 1 year and maximum.  
5. result report: it is used to identify whether  
the receiver receives the message or not.  
6. sending path: you can decide whether  
to save the sent the message into the  
inbox. You can choose send or send  
and save.  
5. change: changing  
the chose  
channel’s number and its name.  
6. delete: deleting the unnecessary  
channel on the deleting screen. You can  
use the OK button(or using the touching  
pen to touch it )to choose the settings of  
7. setting vocabulary: editing and saving  
 
the channel to decide to receive the  
messages from the channel.  
2.5 MMS  
If  
you  
receive  
message  
including  
unsupported objects, it will not appear or be  
played.  
The MMS is composed of texts, pictures and  
voice. Due to the MMS(multimedia  
messaging service), the phone can receive  
and send pictures, sound and texts.  
Attention: MMS service works via your  
network administrator or service provider.  
This mobile phone supports receiving the  
maximum size of 50 KB. It will stop  
automatically receive the information if it is  
beyond limitation.  
Attention: there are may reasons for the  
failure of sending messages, so please do  
not use MMS message to send the key  
information.  
2.5.1 New creation  
while setting new or editing MMS, please  
follow the following steps:  
1. in the message screen, choosing the  
new in the menu of the soft button alert  
area.  
This mobile phone supports MMS for pages,  
that is each paper has one picture, one song  
and characters. The MMS consists of many  
kinds of this page.  
Attention: while using MMS, you may pay for  
information to the service provider of  
network administrator.  
MMS supports the following forms:  
Pictures: JPEG, GIF.  
Sounds: MP3, WAV, MIDI, AMR  
2. pressing U or D(or using the touching  
pen to touch)to select receiver, subject  
and the mail content. Then pressing OK  
(or using the touching pen to have a  
double touch) to reach the window for  
editing.  
3. selecting receivers: you can choose the  
phone number from the address or  
input the number on the screen directly.  
If the receiver is empty, when you need  
 
to send it , the phone will tell you to  
input the number  
item. The pictures item is the default setting.  
7. when you insert music, you can use the  
append music channel in the menu of  
the soft button alert area. Then entering  
in the file list screen, you can use U or  
D (or a double touch)to check the music  
files, and then use the left soft button(or  
the touch pen to touch the identify in the  
soft button alert area)to insert the music  
file into the MMS service.  
8. while changing the pictures, you can  
use changing pictures in the menu. The  
following operation is as the same as  
the inserting pictures.  
9. while changing the music channel, you  
can use changing music channel. The  
following operation is as the same sa  
the inserting music files.  
Attention: 10 numbers are the maximum.  
4. while inputting the subjects, you can  
directly press U or D on the editing  
screen (or use the touching pen to  
touch)to move the focus to select the  
subject. Then you can input the content  
and edit it.  
5. you can insert pictures and music or  
edited text into the MMS message while  
editing the content.  
6. while inserting pictures into the editing  
screen ,you can select the appending  
picture in the menu. Then you can  
press U or D (or have a double touch by  
the touching pen)to select pictures  
while browsing the list screen. You can  
use the OK (or have a double touch) to  
browse the pictures. Then you can use  
the select in the menu to insert the  
pictures into the MMS message.  
10. if you want to delete the current  
inserting pictures, you can use the  
delete picture in the menu of the soft  
button alert area.  
Attention: the customers can choose in any  
11. if you want to delete the current  
 
inserting music, you can use the  
deleting music in the menu of the soft  
button area.  
16. if you want to send messages. You can  
select the send menu to finish it.  
Attention: 1. the MMS messages can only  
be stored in the mobile phone, as they  
possess too much space.  
12. if the customers want to send  
polypaged multimedia messages, you  
can choose the insert page in the menu  
of the soft button alert area. Then select  
to insert new pages to insert a page of a  
new MMS, and the procedure of the  
operation is as the same as the former  
one. You can also select deleting  
page ,pageup and pagedown to switch  
the pages.  
2.before you send it the settings should  
be made first.  
3. when the message is being sent the  
phone will inform you with “connecting with  
the net”-“connecting with the net  
gateway”-“sending message”, if it fails, the  
phone will inform you with “message fails”.  
The failed messages will be stored in to the  
message unsending box(if there is enough  
space).  
13. the settings of pages is used to identify  
the playing period of each one.  
14. editing MMS text. You can input  
characters in the editing frame. You can  
also use the insert words in the menu to  
insert presupposed text into the target  
place.  
4. if it completes, the phone will tell you  
with “sending completed”. If the option  
“keep copies” is activated. The sent  
messages will be automatically stored in  
the sentbox.  
15. if you want to have a view of the  
message before you send it.you can  
select view in the menu.  
5. it will take longer time to send a MMS  
message than a ordinary message.  
2.5.2 Inbox  
 
when a MMS message is received, the  
mobile phone will give you a alert bell and  
store the message into the inbox. While in  
the waiting , the phone will tell you by a  
new frame and change the color of the icon.  
The number of the saving messages is  
dependent on the capacity of the phone.  
When you enter the inbox, you will find that  
all the received messages are stored in the  
inbox. And there is an icon of a little  
envelope before each message to indicate  
the status of the message.  
An icon of an open envelope indicates that  
the message has been read while that of a  
closed one indicates that it has been  
viewed yet. You can use the OK(or a  
double touch by the pen )to read the  
message.  
is successful or not. If it fails, you can  
download it again.  
By choosing detail, you use play, reply,  
delete, forward, call, save number, save  
picture, save music and move.  
Play: playing the picture, sound and text  
automatically.  
Reply: replying to the current message.  
Delete: deleting current message and  
returning to the inbox. The phone will  
inform you whether to delete it or not.  
Call: call the number of the current  
message.  
Save: entering the address and saving the  
number  
Move: move the message into the  
savedbox for the future use.  
2.5.4 outbox  
The first receiving message is the notice.  
you can use OK (or a double touch )to  
identify whether to download or not. If you  
choose identify, you will download the  
message. The phone will inform whether it  
you can browse the sent message in the  
outbox. You can roll the selection bar to  
select the message.  
While reading ,you can get the option of  
playing, editing, deleting, calling, saving  
 
number and moving.  
Play: playing the message automatically.  
Edit: editing the message  
phone will inform you whether to delete it  
or noe.  
Call: calling the numer  
Delete: deleting the current message and  
returning the outbox automatically. The  
phone will inform you whether to delete it  
or noe.  
Save: entering the address and storing the  
receiver’s number.  
Move: moving the message into the  
savedbox for the future use.  
Call: calling the numer  
2.5.6 saved box  
Save: entering the address and storing the  
receiver’s number.  
Move: moving the message into the  
savedbox for the future use.  
the saved box is used to store the  
message. You can roll the selection bar to  
read the message.  
While reading ,you can get the option of  
playing, editing, deleting, calling, saving  
number , storing pictures and storing  
music.  
Play: playing the message automatically.  
Edit: editing the message  
Delete: deleting the current message and  
returning the outbox automatically. The  
phone will inform you whether to delete it  
or noe.  
2.5.5 draft  
the draft is used to store the edited  
message. You can roll the selection bar to  
read the message.  
While reading ,you can get the option of  
playing, editing, deleting, calling, saving  
number and moving.  
Play: playing the message automatically.  
Edit: editing the message  
Delete: deleting the current message and  
returning the outbox automatically. The  
Call: calling the numer  
Save: entering the address and storing the  
 
receiver or sender number.  
gateway, MMS center, port, sending report  
are restored to the default settings.  
(the operations above can be realized by  
the touching pen)  
Storing pictures: all the pictures in a MMS  
message will appear when you enter the  
stored pictures screen. And then you can  
store them in the index of the your  
resource.  
2.6  
the  
Haier  
Entertainment(network-dependent)  
Storing music: all the music in a MMS 1.  
message will appear when you enter the  
stored music screen . and then you can  
store them in the index of your resource.  
haier world: the mobile phone  
agent provides a entertainment net. You  
can activate the WAP directly and go into  
the http://wap.haier.com  
2.5.7 MMS setting  
2.  
GPRS: the network service agent  
provide the wap. You can browse  
wap.moternet.com.  
Attention: you can press the L to go into  
the haier world and GPRS.  
the address of gateway: connecting with  
beehive network and wanwei network/  
MMS center: the address of the MMS  
service center.  
Port: the port number of the MMS service 3.  
center.  
Deliver report: to set if the sender should  
be reported when message is sent to the  
receiver.  
haier entertainment: it provides  
the customers a large of entertainment  
items. You can order it by sending  
messages. The specific items will be  
dependent on the types of the SIM card.  
You can ask the local agent to get the  
detail.  
Setting vocabulary: see the operation of  
the short message.  
Restore factory settings: the address of  
You will pay for  
Ordering and  
 
downloading any the entertainment items,  
according to different types. You can get  
the exact bill from the explanation from the  
list of the entertainment. This service is 3.  
free of charge.  
selecting the backward in the menu of the  
soft key area(or use the touching pen  
touch the backward)  
there are some frames for  
inputting the characters in the netpages for  
communication. You can input the  
characters by the touching pen.  
you can carry on all kinds of  
operations on the browser by using the  
menu.  
(the operation above can be realized by  
the touching pen)  
2.7 browser  
4.  
the mobile phone has the function of  
GPRS. You can use the data calling to  
connect with the internet. You can also 5.  
browser the internet under the support of  
the GSM. And the world will have a close  
relationship with you.  
Attention: to browse the netpage through  
GPRS depends on if the network agent  
provides the service and if you have the  
service.  
the menu includes the following  
functions:  
connection-dialing to the internet.  
Bookmark-entering into the list of the  
bookmark.  
Pageup-returning to the last netpage.  
Pagdown-down to the next netpage.  
Forward-entering the next level of the  
current netpage.  
2.7.1 open the netpage  
1.  
you can browse the internet or the  
Backwadd-entering the high level fo the  
current netpage.  
Stop-stopping downloading the data  
Refresh-downloading the data again.  
list by the touching pen, and get into the  
connection by it.  
2. you can return the last window by  
 
Set-setting the browser  
2.7.3cutting off from the net  
Storing the netpage- showing the list, and  
adding the new one into it.  
Collection-showing the list ,and adding the  
new one into it.  
Returning-connecting with the main  
address.  
you can select the quit in the menu of the  
soft key area to stop using the application  
of the browser.  
(the operations above can be realized by  
the touching pen)  
2.7.4 setting of net connection  
Dialing path-setting the configuration list  
and using them to connect with the net.  
Cutting off from the net-cutting off  
(the operations above can be realized by  
the touching pen)  
the customers can use different account to  
connect with the net by different ways. You  
can use the net function for the account to  
select and create the settings of the  
connection.  
2.7.2 downloading the data  
selecting the settings.  
1. you can use the connection or call in  
the menu of the soft key area to have a  
connection with the net and download the  
data.  
If you want to select the connection  
settings, you can enter the dialing selection  
window by pressing the dialing path in the  
menu. Then pressing connecting to get in  
the net. The mobile phone has three  
default settings: they are GPRS_WAP,  
GPRS_NET, CSD_WAP.  
2. the customers must appointed  
a
location for the data. The customer’s  
resource in the mobile phone must have  
enough capacity for them.  
2. Creating new settings  
(The touching pen can realize the  
operations above)  
If you want to create new settings ,you  
should input new information. You can ask  
 
the net agent to get the setting information.  
1) entering the window of the dialing path  
by pressing the dialing path in the menu of  
the soft key area.  
2) Selecting a setting list and entering it.  
3) Inputting the content of settings  
4) After finishing it ,you can press left soft  
key (or touch the save on the soft key)to  
store settings.  
5) You can quit without storing it by  
pressing the right soft key (or touch the  
return on the soft key)  
(the operations above can be realized by  
the touching pen)  
provide the following services: new  
recommendation, the original card number,  
comprehensive  
news,  
happy  
communication, entertainment, customer  
service, card list, SM group and dynamic  
distribution. While some areas which  
support the GPRS will provide the following  
services: identification, the information of  
cards, inquiry of bill, flying seeing of yangzi,  
prophet of the climate, the information of  
the stake, the information of lottery, mobile  
bbs and so on. The content of the STK is  
all dependent on the SIM card agent.  
You can get more detail news from the  
local agents.  
2.8 STK  
STK provides value added service of the  
SIM card.  
Attention: the window will not appear the  
application of the STK if you do not insert  
the SIM card.  
The services provided by the STK are  
different according to the types of the SIM  
card. The China Mobile’s SIM card will  
have functions, while the SIM card of  
Unicom has little more. For example, some  
areas which supporting the world com will  
2.9 Flying mode  
if the mobile phone is await, you can use the  
OK or left soft key to enter the main menu.  
And then you can use U or D to choose the  
communication menu. By pressing the OK  
 
or L you can move the U,P,L,R to select the  
icon of flying mode. Pressing ok or left soft  
key , or to touch the quick function icon on  
the top to open or close the mode.  
It is effective when it is restarted. Opening  
the mode will not result in initialization. The  
functions in relation with the net, SIM card  
will exert nothing.  
3.1.3shooting model:  
1. single-shoot: to take common single  
photo.  
2. successive shoot: to take photos  
successively;  
3. 10-seconds delaying shoot: take 10  
seconds shoot.  
3.1.4camera setting  
Attention: though the functions can not be  
used, you should be careful to use this  
mode in the situation of commanding that  
the mobile phones should be powered off.  
3. Application of multimedia list  
3.1 Camera  
you can change the setting by pressing the  
menu key at the left side or to touch the  
screen to find the hidden menu.  
The settings of the camera include:  
1. The mode of camera: single shoot,  
successive shoot, 10 seconds delaying  
shoot  
3.1.1 Application  
You can select the icon or press the button  
enter into the camera. The photos will  
appear in the screen.  
2. The white balance: automatica, sunny,  
cloud, daylight lamp and fluorometry.  
3. The quality of shoot: choosing common,  
elaborate and super-elaborate.  
4. The mode of MMS: selecting open or  
close.  
3.1.2camera  
You can press the photo key at the right side  
of the phone to take photo. And the photos  
will be stored in the picture profile of the  
customer’s resource.  
5. Effectiveness: close, natural, vivid, tea,  
cold, reversal and blackwhite color.  
 
6. The compensation of exposal  
7. The accommodation of the screen’s  
brightness.  
On the screen of the preview of the  
photo, you can press the photo key to  
switch into the camera screen.  
8. The mode of night: selecting open or  
close.  
9. The size of the photos: setting the size  
14. The application of quit: pressing mode  
key, the power key or the hanging up  
key. Or touch the MODE icon on the  
topleft of the screen.  
MAX 1280*1024,  
L
640*480,  
M
320*240, Min 176*144  
3.2 Movie capture  
10. The storing location: you can store the  
photos in the mobile phone or in the SD  
card.  
3.2.1  
Application  
You can enter it by pressing the icon. The  
image captured will appear on the screen.  
11. UP/DOWN: you can touch the icon on  
the righttop to realize it. Pressing the  
1-9,#* can also finish it.  
12. adjusting the focus: while you are taking  
photos, you can press the 2 on the right  
to enlarge the focus. While the 3 to  
shorten it. Or you can use U or D to  
adjust the focus.  
3.2.2  
Capture  
you can press the capture key at the right  
side of the phone to take short film. The  
red round icon means that it is capturing. If  
you press it again, the red round icon will  
disappear. It means capture is over. The  
short film will be stored in the movie  
profiles of the customer’s resource.  
13. the preview of the photos: you can  
press the mode key to switch among  
the modes of camera, preview of photo,  
movie capture and preview of short film.  
1.  
sunny,  
The white balance: automatica,  
cloud, daylight lamp and  
fluorometry  
2. Effectiveness: close, natural, vivid,  
 
tea, cold, reversal and blackwhite color.  
Downplay or stop  
3.  
4.  
the compensation of exposal  
the size of the short film: L320*240,  
Left-turning down volume  
Right-turning up volume  
Min 176*144.  
OK recording or stopping record  
Left soft key-enter record file list  
Right soft key-quit and store current files  
5.  
UP/DOWN: you can touch the icon  
on the righttop to realize it. Pressing the  
1-9,#* can also finish it.  
3.3.2  
Recording  
6.  
the storing location: you can store  
1. Setting time: pressing the editing time  
frame and editing time. The maximum is 10  
minutes.  
2. Pressing the OK (or touch the record by  
the pen ) starts recording. While recording,  
you can use the L or R to adjust the volume  
(or touch the volume by the pen). You can  
pause it by the U (or touch the pause)  
3. The file will be stored in the record  
profiles of the customer’s resource.  
the films in the phone or in the SD card.  
7. the preview of the films: you can press  
the mode key to switch among the modes  
of camera, preview of film, movie capture  
and preview of short film. On the screen of  
the preview of the film, you can press the  
photo key to switch into the camera  
screen.  
8.  
the application of quit: pressing  
mode key , the power key or the hanging  
up key. or touch the MODE icon on the  
topleft of the screen.  
4. The form is the yy, mm, dd, hh, mm, ss.  
3.3.3playing the recording files  
1. After entering the record window you  
can play the files using the left soft key(or  
by a double touch on the list of the  
files),then select the file to be played.  
3.3 recoder  
3.3.1  
Introduction of keys in the screen  
up-pause  
 
2. While playing you can use the L or R  
(or touch the control) to control the volume,  
and U to pause while D to continue.  
3.3.4 deleting record files  
When you delete the files, you should  
delete them in the record profiles of the  
customer’s resource; if you want to delete  
them in the list of the record application,  
you should choose the delete on the soft  
key. if you delete the record, the one in the  
customer’s resource will disappear.  
3.4 Video  
Pressing the U or D (or 2 key on the right, 3  
key on the right) can switch to the correct  
files. Pressing the L or R (or mode, menu)  
is to control the volume. Pressing left soft  
key is to make the video maximum or  
minimum. Pressing OK is to pause or play.  
Pressing the right soft key is to stop. It will  
return to the playing list by pressing it again.  
Pressing C key is to return to the playing  
list; home is to the main menu.  
(the operations above can be realized by  
the touching pen)  
the profile in the video list is the default  
setting video in the kinescope of the  
customer’s resource. If you want to play  
other files, you can select other index in the  
menu of the soft key. the application of the  
customer’s resource will give you what you  
want to play.  
you can enter the index of the customer’s  
resource. Entering the profiles, you can  
press the U or P to select the video. You  
can use OK to play it. The operation is as  
the same as the above.  
3.3.3  
The use of AV-LIND (only for the  
customers buying AV-LINK)  
3.4.1  
Playing video  
inserting one part of the AV-LINE into the  
phone, the other part into the music  
inputting of the TV. Then video and music  
will be on the TV. If you pull out the line  
You can use UD or the touch pen to select  
which you want. Pressing OK (or a double  
touch on select) is to start playing.  
 
from the phone, video and music will return  
to the phone. The line will not influence the  
operation of the fundamental functions,  
such as sending and receiving messages ,  
picking up the call.  
Some audio files can be operated  
through the audio player. However, some  
audio files of certain formats and some large  
files can not be operated due to the  
limitation of the mobile.  
The introduction of inserting the AV-lINE  
3.5.1 Enter the audio player  
1.  
when the mobile phone is not in  
1. Click the ‘audio player’ icon of the  
shortcut menu at the top of the screen with  
the touch pen.  
the inserting screen, if you insert the line,  
the content will sill on the phone.  
2.  
when the mobile phone is  
2. Enter the operation of ‘audio play’ by  
clicking the MP3 key.  
3. Choose ‘audio play’ of the main menu to  
enter the ‘audio play’.  
inserting screen, if you insert the line into  
the phone , the phone will become black.  
Meanwile, the TV will not play either. If you  
insert the line into the TV, the phone will  
still be black.  
3.5.2 Add audio files  
1. To operate the adio files, choose the  
‘music list’of ‘menu’in the soft key tip zone to  
enter the music list.  
2. Click twice the ‘add’ in the ‘menu’of the  
soft key tip zone to enter the music files  
folder menu. Then choose the audio file you  
like and click ‘confirm’to return to the music  
list.  
3.  
when the TV is on play, if you quit  
from the list or pull out the line from the  
phone. The show will be on the phone’s  
screen.  
4.  
when the TV is on play, if you pull  
out the line from the TV, the TV will not play  
and the mobile phone will be black.  
3.5 Audio Player  
3. Click twice the audio file to play, or  
 
choose the ‘play’in the ‘menu’ of the soft key  
tip zone. (or click the ‘play’on the screen  
with the touch pen.)  
sound track.  
4. ‘Right track’ Switch the music to the right  
sound track.  
3.5.3 Move audio files  
5. ‘Even’ Make the music sound track even.  
6. ‘Sequential play’ play the music files in the  
list sequentially.  
7. ‘Arbitrary play’ plays the music files  
arbitrarily.  
To move the files in the play list, choose the  
‘up’ and ‘down’ in the ‘menu’ of the soft key  
tip zone to move the chosen audio files up or  
down.  
3. 5.4 Delete Audio Files  
8. ‘repetition’ repeatedly plays a single  
music.  
9. ‘Hide’ Hide the music player and operate  
it behind the screen.  
10. ‘the previous’ play the previous music  
file. (up key)  
11. ‘the next’ play the next music file. (down  
key)  
12. ‘stop’ Stop playing, ‘pause’ Pause the  
player.  
13. ‘left key’ tune down the volume; ‘right  
key’tune up the volume.  
14. Press the ‘mode’key(on the left of the  
mobile) to tune up and press the ‘menu’ key  
(on the left of the mobile) to tune down the  
To delete the files in the music list, choose  
the ‘delete’ of the ‘menu’of soft key tip zone  
to enter files list. Choose the files you want  
to delete, click ‘delete’, then there will be a  
tip window ‘are you sure to delete?’, click  
‘yes’ to delete the chosen file.  
3.5.5 The main screen menu of the audio  
player and the functions of the keys.  
1. ‘Music list’ You can enter the music list  
to add or delete music files.  
2. ‘Play’ Play the music in the music list  
(the time and name of the music played is  
revealed on the screen)  
3. ‘Left track’ Switch the music to the left  
 
volume.  
dial). The music will be paused during your  
call.  
You can write, coin and send messages  
without turning off the player.  
Warning, during the operation of the player,  
any inappropriate insertion or pulling out of  
the MMC and USB will lead to the instability  
of the system and an eternal damage to the  
MMC card.  
15. Press the key 1(on the right of the  
mobile) to play the previous file and press  
the key 2(on the left of the mobile) to play  
the next file.  
3.5.6 The play formats supported by the  
audio player  
The audio player supports the following  
formats: mp3, amr, midi(mid), wav.  
The player can’t play the damaged files  
of the listed formats and will automatically  
delete them from the play list.  
3.6 Browse the pictures  
You can browse the pictures saved in the  
mobile through the browse function. Enter  
the ‘picture list’ and the picture files in the  
‘photo’ folder of the user’s information folder.  
Also, you can choose the ‘open picture’ of  
the ‘menu’ in the soft key tip zone to choose  
the pictures under other items of the user’s  
information folder.  
1. ‘Cut down pictures’: choose the ‘cut  
down pictures’ in the ‘menu’ of the soft  
key tip zone.(or click the ‘cut down  
pictures/list switching’ icon) to switch  
between cut down pictures and picture  
3. 5.7 Dialing and receiving calls during the  
playing of music files.  
If there are any calls, messages or other  
information during the playing of music files,  
the mobile will pause the playing and a tip  
window will be revealed. You can choose to  
receive to refuse the calls.  
Choose ‘call off’ to end the telephone call  
and you can continue to listen to the music.  
You can dial the mobile without turning off  
the player (the player will be hidden if you  
 
list.  
8. ‘Original’ You can choose the ‘original’  
and ‘window matching’ in the ‘menu’ (or  
click the corresponding icon at the  
bottom of the picture with the touch pen)  
to switch the size of the pictures.  
2. ‘Reset’ click ‘reset’ to switch the cursor  
to the first picture.  
3. ‘Delete’ click ‘delete’ to delete all or part  
of the pictures.(or click the ‘delete’ icon  
at the upper right screen with the touch  
pen.)  
9. ‘Open picture’ open the pictures under  
other items.  
4. ‘wall paper’ open a picture, choose the  
‘wall paper’ in the ‘menu’ of the soft key  
tip zone (or click the ‘wall paper’ icon at  
the bottom of the picture) to set the  
picture as a wall paper.  
5. ‘MMS’ press ‘mms’ to send the picture  
as an attachment of the MMS.  
6. ‘MMS’ press ‘mms’ to send the picture  
as an attachment of the MMS.  
10. 90 degree revolving: a 90 degree’s  
revolving to the chosen picture.  
11. The manipulation of the connection to  
the link wires.  
a. When the mobile is on the single picture  
browsing mode, connect the mobile with  
a link wires to enter the TV single picture  
browsing mode. The mobile will be in  
black screen at the moment.  
7. Switch the pictures: You can choose the  
‘previous’ and ‘next’ in the ‘menu’ of the  
soft key tip zone or press left or right  
direction key to switch pictures. (or click  
the ‘left and right switch’ icon at the  
bottom of the picture with the touch  
pen.)  
b. Press left and right direction key or the  
key2 and 3 of the right side of the mobile  
to switch the pictures at the TV browsing  
mode. (The switching function of the  
key2 and 3 of the right side of the mobile  
can only be available at the TV mode.)  
c. At the TV browse mode, press CLR key,  
 
power key/call off key, home key to quit  
the TV mode and the screen will be  
bright again. Meanwhile, the original  
functions of CLR key, power key/call off  
key, home key will be resumed.  
or a click on the screen will make the  
mobile quit the TV mode and resume to  
the single picture browsing mode. At the  
moment (the link wire still connected),  
there will be a ‘TV browsing’ item of the  
menu on the screen. Press left or right  
key or connect the link wire again and  
process any manipulation on the screen  
to switch back to TV single picture  
browsing mode and the mobile will  
return to the black screen. (If you  
choose the ‘MMS’ icon, the TV single  
picture browsing mode will be resumed  
before the stimulation of the MMS  
program, after witch the MMS editing  
window will be revealed.)  
d. At the TV browse mode, press MP3 key  
to quit the TV mode and black screen  
state, meanwhile the operation of MP3  
will be stimulated. At the time, all your  
manipulations will be targeted to the  
MP3. The MP3 will be played through  
the TV track instead of the mobile track.  
If you hide MP3 again, the mobile will  
return to the single picture browsing  
mode and all the manipulations will be  
targeted to the browsing function and  
the MP3 will continue to play through the  
TV track.  
g. The realization function of the key 2, 3 at  
the right side of the mobile depends on  
the operation of the stimulation.  
h. Only the static pictures of appropriate  
formats can be revealed on the TV  
through the connection with the link wire.  
The motion pictures or pictures of  
e. At the TV browse mode, the left and  
right soft keys, the mode, menu and  
shoot key will not be have any functions.  
f. At the TV mode, a click of any keys  
(excluding the keys mentioned above)  
 
inappropriate formats viewed under the  
mobile browsing mode can’t be viewed  
on the TV. When pictures are viewed at  
the TV mode, if a motion picture or a  
picture of an inappropriate format is  
switched, the TV will not reveal the  
picture and the TV browse mode will be  
quitted.  
1280*1024 for static pictures and 226*170  
for motion pictures.  
3. Only the first frame of the GIF  
pictures that are larger than the browsing  
screen can be revealed.  
3.7 Picture zooming in  
You can use the zooming in function to  
zooming in the corresponding pictures  
saved in the ‘user’s information’ folder of the  
mobile. Choose ‘zoom in’ to enter the jpeg  
1024*768 pictures list under the photo item.  
Click the left soft key( or click the ‘zoom in’ at  
the soft key tip zone.), there will be tip for  
you to zoom in the pictures. You can save  
the zoomed in pictures to the MMC card.  
Notice: As the zoomed in pictures are saved  
to the MMC card directly, you can only  
operate the ‘zoom in’ when the MMC card is  
installed.  
g. At the TV browse mode, the mobile will  
be at a black screen state. Click the  
shortcut item at the top of the screen  
and the operation of the shortcut can be  
stimulated. At the moment the screen  
will turn illuminated and the TV mode  
will be quitted. Meanwhile, all the  
manipulations will be targeted to their  
default functions accordingly when the  
according manipulation are operated.  
Notice: 1. The quality of pictures may be  
degraded if there is a lack of sufficient lights.  
2. The mobile supports the pictures  
of the jpg, bmp, gif and png formats. The  
maximal size supported by the mobile is  
3.8 Picture Editing  
The picture editor can only support the bmp  
and jpg pictures. It can help you draw  
pictures, edit pictures or rename pictures  
 
with its drawing tools and all the functions  
under the ‘menu’ of the soft key tip zone.  
3.8.1 Drawing tools  
zone.  
f. Circle  
Click the circle icon with the touching pen  
and then you can draw circles and ovals at  
the picture-editing zone.  
3.8.1 Tool window  
a. Frame  
Click the frame icon with the touch pen and  
then you can frame the picture at the  
picture-editing zone.  
g. Straight lines  
Click the straight-line icon with the touching  
pen and then you can draw straight lines at  
the picture-editing zone.  
b. Brush  
Click the brush icon with the touch pen  
and then you can draw or edit pictures.  
c. Eraser  
Click the eraser icon with the touch pen  
and then you can erase the parts you don’t  
want.  
h. Revolve  
Click the revolve icon with the touching  
pen and then you can revolve the picture  
you framed clockwise.  
i. Words  
Click the alphabet icon with the touching pen  
to enter the words input screen. In put the  
words you need and press the left soft key  
(or click the ‘yes’ of the soft key tip zone).  
Then the screen will return to the picture  
editing window and the words you input will  
be revealed on the picture.  
d. Color bucket  
Click the color bucket icon with the  
touch pen and then you can add the colors  
you want to the picture-editing zone.  
e. Rectangle  
Click the rectangle icon with the  
touching pen and then you can draw  
rectangles and squares at the picture-editing  
3.8.1.2 Palette  
a. Click the palette icon with the touching  
 
pen and the palette will be revealed at the  
picture-editing zone.  
b. Choose the color you need and click the  
chosen color with the touching pen; the  
chosen colour will be on the palette.  
c. Palette revealing  
want to open. Click left key (or click ‘yes’  
with the touching pen), the chosen picture  
will be revealed at the picture-editing zone.  
d. Adding frame  
A frame will be added to the picture at  
the picture-editing zone.  
The now foreground colour will be the  
colour you choose and the former  
foreground color will turn to the  
background colour.  
e. Save as  
Enter ‘save as’ window, input the file  
name (the file name must be correct) and  
then click the left soft key (or click ‘save’ with  
the touching pen).  
d. Switch icon  
Click the switch icon to switch the  
foreground and background colours.  
3.8.1.3 The functions of items  
You can choose the following items at the  
soft key tip zone  
f. Withdraw  
The previous manipulation can be  
withdrawn by a click of ‘withdraw’  
3.9 User’s information  
3.9.1 Newly established catalog  
a. Save  
Save the present picture  
b. New  
Enter the new picture-editing window  
c. Open  
Enter the picture list; click ‘up’ and ‘down’  
direction button to choose the pictures you  
Move the cursor to a default folder and  
press ‘ok’ (or click the item with the touching  
pen). Choose the ‘new’ of the ‘menu’ in the  
soft key tip zone to enter the new catalog  
window. After inputting the name for the new  
catalog, press the left soft key (or click the  
‘save’ of the soft key tip zone’ to establish  
 
the new catalog under the default folder.  
3.9.2 Open files  
3.9.4 Delete  
Enter the ‘user’s information’, then move  
the cursor to the files to be deleted and  
press ok (or click it with the touching pen) to  
enter the folder. Choose ‘delete’of the  
‘menu’in the soft key tip zone to open the  
delete window. Choose the file you want to  
delete and press the left soft key (or click the  
‘delete’ of the soft key tip zone with the  
touching pen). There will be a tip window for  
confrmation of the deletion, press ‘ok’(or  
click ‘yes’) to delete it.  
Certain operations will be stimulated  
according to the different types of the  
recognized files. E.g. the ‘audio player’ will  
be operated when a mp3 file is opened.  
Take the opening of the mp3 file under the  
recorder folder for example. First, enter  
‘user’s information’ and move the cursor to  
‘record’and press OK key (or click it with the  
touching pen) to enter the folder, where  
there are already some MP3 music. Move  
the cursor to the music you like and press  
ok(or click it with the touching pen) to play it.  
3.9.3 Search  
Enter the ‘user’s information’, then press the  
left soft key at the folder list window(or click  
the ‘search’at the soft key tip zone) to enter  
the search window. Input the name of the  
folder you want to find and then press the  
left soft key(or click the ‘search’at the soft  
key tip zone with the touching pen) to search  
for it.  
3.9.5 rename files  
Enter the ‘user’s information’, move the  
cursor to the folder containing the file you  
want to rename and then press ‘ok’(or click it  
with the touching pen) to enter it. Press the  
up and down direction key to move the  
cursor to the file to be renamed, then  
choose ‘rename’of the ‘menu’in the soft key  
tip zone to open the rename window. Input  
the new name and then press the left soft  
key(or click ‘save’in the soft key tip zone  
 
with the touching pen) to finish the renaming  
process.  
copy the related files to the mobile through  
the manipulation of your PC.  
3.9.6 MMS sending  
Send the present picture as  
attachment  
3.9.7 Email sending  
Send the present picture as an email  
attachment  
2. After the installation of the MMC card,  
there will be a MMC card folder in the ‘user’s  
information’and you can manipulate on it. If  
the MMS card is used with the PC, the folder  
will not be revealed. If you want to pull out  
the MMC card, you should click the shortcut  
icon and process the tipped manipulations  
first.  
a
MMS  
3.9.8 UP  
Switch to the upper window of the ‘user’s  
information’  
4.1 Schedule  
3.9.9 Cut, copy and paste  
Cut or copy the present file and press ‘paste’  
at under the target folder  
3.9.10 property  
You can check the detailed information of  
the present file.  
3.9.11 Manipulations related to the U(MMC)  
drive  
1. If the mobile is used as a USB drive, you  
can only see the setup folder in the ‘user’s  
information’. However, all the default  
catalogs will be revealed on PC and you can  
Through the schedule function you can input  
related information and setup informing time  
so that the mobile phone can inform you of  
the information at the previously set time.  
4.1.1 New schedule  
Press the left soft key(or click the ‘week’/  
‘month’ at the soft key tip zone with the  
touching pen, then choose the date with the  
‘month’ and choose to swith the chosen  
dates through ‘week’. After the cursor is  
moved to the chosen date, press ‘ok’key if  
there is no record on it (or click it with the  
 
touching pen) and you can establish a new  
schedule. If there is already a record on the  
chosen date, press ‘ok’(or click it with the  
touching pen) to enter the schedule list.  
Then select ‘new’of the menu at the tip zone  
to establish a new schedule. Under the  
editing window, input the content for ‘topic’,  
‘beginning time’, ‘end time’, ‘informing in  
advance’. Then, you can choose ‘save’in the  
menu of the soft key tip zone to save or  
press ‘send as message’or ‘send as email’  
to send it after your editing. There will be a  
red mark and a icon for this date at  
the month calendar and week calendar  
respectively.  
Enter a date where you have completed the  
schedule, choose the ‘deletion’ in the menu  
of the soft key tip zone to enter the ‘deletion’  
window. Choose the schedule you want to  
delete, press the left soft key (or click  
‘deletion’with the touching pen), there will be  
a tip window for confirmation. Press ‘ok’(or  
click ‘yes’with the touching pen) to delete the  
schedule.  
4.1.4 State  
Enter a date where you have completed the  
schedule, choose the ‘state’ in the menu of  
the soft key tip zone to enter the ‘state’  
window. You can check the state of the  
schedule, including how many schedules  
you have saved, how much free has been  
left. The state can only be browsed, any  
manipulation to it is impossible.  
4.1.2 Search  
Enter a date where you have completed the  
schedule, choose ‘search’ in the menu of the  
soft key tip zone. Input the search content  
and press the left soft key (or click ‘search’  
with the touching pen) to search for the  
schedule you want to find.  
4.2 Task  
You can input related information in the  
‘task’  
4.2.1 New task  
Choose ‘new’in the ‘menu’of the soft key  
4.1.3 Deletion  
 
tip zone to establish a new task. If there is  
no record in the task list, you can press the  
left soft key to establish a new task directly.  
Input the contents in ‘topic’, ‘begin’, ‘finish’,  
‘person’and ‘content’, then choose ‘save’in  
the ‘menu’ of the soft key tip zone to save.  
Also, you can choose ‘send as a message’or  
‘send as an email’in the ‘menu’of the soft  
key tip zone to send the task item you  
completed.  
4.3 Electronic book  
You can read some PDB and TXT files  
through the electronic book.  
4.2 Read electronic books  
At the electronic book window, you can open  
the electronic book list. Choose the book  
you like by press the up and down direction  
keys (or click the book with the touching  
pen), then press ‘ok’ key( or click twice it  
with the touching pen), or press the left soft  
key (or click ‘read’ at the soft key tip zone) to  
read. The size, the number of pages and the  
present page number of the book can be  
revealed on the reading window. Press the  
left and right direction key (or click the two  
keys of ‘switch pages’ on the window to  
switch pages.  
4.3.2 The setup of the electronic book  
1. Specified character set  
The mobile phone supports GB2312, UTF8,  
UTF16, BIG5 character formats, all of which  
can be switched to eacher other. The default  
format is GB2312.  
4.2.2 Search  
Choose ‘search’ in the menu of the soft key  
tip zone. Input the search content and press  
the left soft key (or click ‘search’ with the  
touching pen) to search for the task item you  
want to find.  
Choose the ‘deletion’ in the menu of the soft  
key tip zone to enter the ‘deletion’ window.  
Choose the task item you want to delete,  
press the left soft key (or click ‘deletion’with  
the touching pen), there will be a tip window  
for confirmation. Press ‘ok’(or click ‘yes’with  
the touching pen) to delete the task.  
 
2. Specified size  
4.4 Writing board  
The mobile phone supports 16*16 and  
24*24 font sizes, which can be switched  
freely. The default size is 16*16.  
3. Choose background picture  
You can choose the pictures under the  
folders of the mobiles to be the background  
picture.  
4Choose the background colour  
You can choose different colours to be the  
background colour.  
5Choose the font colour  
You can change the font colours.  
6. Set up auto-rolling  
You can set a screen rolling speed between  
0-9999 mini-second  
4.4.1 New writing board  
Choose ‘new’in the ‘menu’of the soft key tip  
zone to establish a new writing board. You  
can choose ‘save’in the ‘menu’ of the soft  
key tip zone to save. Also, you can choose  
‘send as a message’or ‘send as an email’in  
the ‘menu’of the soft key tip zone to send the  
board you completed.  
4.2.2 Search  
Choose ‘search’ in the menu of the soft key  
tip zone. Input the search content and press  
the left soft key (or click ‘search’ with the  
touching pen) to search for the writing board  
you want to find.  
4.4.3 Deletion  
Choose the ‘deletion’ in the menu of the soft  
key tip zone to enter the ‘deletion’ window.  
Choose the writing board you want to delete,  
press the left soft key (or click ‘deletion’with  
the touching pen), there will be a tip window  
for confirmation. Press ‘ok’(or click ‘yes’with  
the touching pen) to delete the writing board.  
7. Set up auto-screen turning  
You can set a screen turning speed between  
0-99 seconds  
Notice: The items in ‘character set’ and ‘font  
size’ can be set as default. All the electronic  
books are presented with the default values  
after such a setting.  
 
4.4.4 Files management  
item, then the alarm clock will ring every day.  
4. Week ring: Press ‘ok’ key (or click with the  
touching pen.) to choose ‘week ring’ item, a  
selection list from Monday to Sunday will be  
opened. You can press up and down  
direction key (or click with the touching pen.)  
to decide how many times the alarm clock  
rings every week.  
You can open and browse other files under  
other folders through ‘user’s information’  
4.5 Alarm clock  
At the alarm clock window, there are two  
sorts of alarm clocks; 3 repeating clocks and  
two one-off clocks.  
4.5.1 Repeating alarm clocks  
Press up and down direction keys( or click  
with the touching pen) to choose the alarm  
clock to be edited and then press ‘ok’ key (or  
click twice with the touching pen) to enter  
the editing window.  
1. Time: 24 hours, press number keys (or  
click with the touching pen) to input alarm  
clock time. E.g. if you press 0630, the alarm  
clock will ring at 6:30 am. If you press 1800,  
the alarm clock will ring at 6:00 pm.  
2. Open: Press ‘ok’ key (or click with the  
touching pen.) to choose ‘open’ item to  
choose open or close the alarm clock.  
3. Everyday ring: Press ‘ok’ key (or click with  
the touching pen.) to choose ‘everyday ring’  
4.5.2 One-off alarm clocks  
Press up and down direction keys( or click  
with the touching pen) to choose the alarm  
clock to be edited and then press ‘ok’ key (or  
click twice with the touching pen) to enter  
the editing window.  
1. Time: 24 hours, press number keys( or  
click with the touching pen) to input alarm  
clock time. E.g. if you press 0630, the alarm  
clock will ring at 6:30 am. If you press 1800,  
the alarm clock will ring at 6:00 pm.  
2. Open: Press ‘ok’ key (or click with the  
touching pen.) to choose ‘open’ item to  
choose open or close the alarm clock.  
3. Week selection: There will be single  
 
selection list from Monday to Sunday, press  
up and down direction key(or click with the  
touching pen) to choose the date for the  
alarm clock (single selection only). E.g. If  
you choose 14:00, open, Friday, then the  
alarm clock will ring at 2:00 pm on Friday.  
The clock set will be cleared after the ringing  
and will not ring again.  
the ‘number’keys on the screen) to input  
number, press up, down, left and right key  
(or click the ‘calculating’key with the  
touching pen) to calculate. Press OK key (or  
click the ‘equalizer’key with the touching pen)  
to get the result. Press CLR key(or click  
‘back’key on the screen with the touching  
pen) to delete input numbers. Press the left  
soft key (or click the ‘clear’at the soft key tip  
zone) to clear the results or residues.  
4.5.3 Off Alarm clock  
Choose the ‘off alarm clock’item, then set up  
the alarm time at ‘repeating clock’ and  
‘one-off clock’item. Then, press the left soft  
key (click ‘save’at the soft key tip zone with  
the touching pen). After the saving, the clock  
will ring at the pre-set time even though the  
mobile is turned off. If you don’t choose this  
item, the clock will not ring if the mobile is  
turned off at the preset time.  
Notice: the calculating span of the calculator  
is between 10300 10160  
.
4.7 Dictionary  
1. Press the left soft key (or click the  
‘Chinese to English/ English to Chinese’) to  
switch between English- Chinese Dictionary  
and Chinese- English Dictionary.  
2. In English- Chinese Dictionary (Chinese-  
English Dictionary) window, input the letters  
or characters in the editing frame, then the  
corresponding translations will be listed.  
Press the ‘previous’ (‘next’) key with the  
4.6 Calculator  
The calculator has all the basic calculating  
function: addition, subtraction, multiplication,  
division, MC, MR, M+.  
Manipulation: Press the number key(or click  
 
touching pen to see the previous (next)  
word’s translation. Press CLR key (or click  
‘back’ key with the touching pen) to delete  
the input words or characters.  
3. Press the right soft key (or click ‘quit’ with  
the touching pen) to quit the dictionary.  
4.8 Data synchronization  
Through this function, the synchronization  
between the data in the Microsoft Outlook  
2000 in PC and the data in the phonebook of  
the mobile can be achieved.  
then press the left soft key (or click ‘start’ at  
the soft key tip zone). After the initialization  
of the mobile, open the mFone Sync  
program installed in the PC and press start.  
There will be a progress span under the  
synchronization  
span.  
After  
the  
synchronization, restart the mobile to finish  
the data synchronization.  
Notice: 1. To ensure the correctness, please  
ensure that the time in PC is in coincidence  
with the time of the mobile.  
4.8.1 Preparation for synchronization  
1. The Windows 2000 and XP system are  
required. Also, the Outlook 2000 of Microsoft  
Office and the mFone Sync program of the  
CD-ROM of the phone should be setup.  
2. Connect the mobile and the PC  
appropriately with USB wire.  
2. If unexpected situations occur during the  
synchronization, please turn off the mFone  
Sync program, quit the data synchronization  
of the mobile and then restart the process  
mentioned above.  
4.9 Service telephone  
4.8.2 Synchronization process  
‘Service telephone’ provides you with all the  
domestic service center phone number of  
Qingdao Hai’er Communication Ltd all over  
China. You can dial the numbers searching  
for help.  
The dialogue frame ‘for the USB drive?’ will  
be opened after the USB wire is connected  
to the mobile. Choose ‘no’ to enter the  
mobile data synchronization window and  
 
5.1 JAVA  
You can download and update the  
program written by j2me software from  
web-sites through the java function of the  
mobile so that the expension of potential  
check if there are any differences between  
the program downloaded in the mobile and  
the same program provided by web sites. If  
the program of web sites has been updated,  
there will be tip informing you of updating. If  
functions of the mobile can be ensured. Also, not, there will also be a tip telling you that  
there are several default java programs for  
you to use.  
5.1.2 Program Deletion  
Choose ‘deletion’ of ‘menu’ in the tip zone  
to delete the installed program. There will be  
tip window for confirmation. You can only  
click ‘yes’ to confirm the deletion and the ‘ok’  
key cannot work.  
the program in your mobile is the latest.  
The updating of the programs can be  
achieved in two forms: 1. You can choose  
the ‘updating’ in ‘menu’ to update directly. 2.  
You can choose ‘management’ of ‘menu’  
and then choose the ‘update’ of ‘menu’ to  
update the program.  
5.1.5  
The  
permission  
setting  
for  
5.1.3 Management Program  
downloading  
Choose ‘management’ of ‘menu’ in the tip  
zone to enter the program management  
window, including the permission setting for  
the program downloading and updating. The  
followings are the details for ‘updating’ and  
‘permission’.  
You need different permission settings  
to download programs from different  
web-sites and you can have such settings  
through ‘permission’.  
There are two approaches to enter the  
permission setting:1. You can choose  
‘permission’ from ‘menu’ of the soft key tip  
zone directly to set permissions. 2. You can  
5.1.4 Program updating  
You can choose ‘update’ in ‘menu’ to  
 
choose ‘management’ of the ‘menu’ and  
then choose ‘permission’ from ‘menu’ of the  
softkey tip zone to set permissions.  
through the operation of JAVA/SD will be  
saved to the MMC/SD card. When the JAVA  
program is to be operated again, the data  
will be read from MMC/SD.  
5.1.6 Download program  
At the JAVA window, you can press the right  
soft key( or click ‘setup’ in the soft key tip  
zone with the touching pen) to enter the  
program downloading window. You can  
download the programs only after inputing  
the correct web-address and connecting the  
mobile to the internet through dialing.  
Notice: 1. The local net support is needed  
during the downloading process. The user  
should also inaugurate the corresponding  
network downloading services.  
Notice: If the MMC/SD with installing  
data is pulled off, the installed JAVA program  
can not be stimulated through entering the  
operation of JAVA/SD. If the installation  
record of JAVA/SD exists, all the JAVA  
program can be operated after the insertion  
of different MMC/SD card.  
5.3 Game  
There are four games in the mobile:  
Box-pulling, Five pieces chess, Huarong  
route, Wujiandao. The game rules can be  
browsed by selecting the ‘help’item from the  
menu. You can quit the games by pressing  
power/call off key or Home key at any time.  
5.3.1 Box-pulling  
2. To ensure a stable running of the  
downloaded java program, please down the  
qualified JAVA program provide by the legal  
web-sites.  
5.2 JAVA/SD  
5.3.1.1 Game rules  
The function of JAVA/SD is almost the  
same as that of JAVA. The difference  
between is that the JAVA programs installed  
There 5 different items on the game window:  
Wall, Box-puller, Box, Shady zone and bright  
zone. The task for you is to pull all the boxes  
 
to the shady area. The rules are: you can  
pull a box forward and you can’t pull the  
boxes against the wall or the boxes against  
the other boxes.  
the box, then you can pull the box.  
7. There 70 missions in the game. The  
mission number will be revealed at the  
upper left top of the game. After each  
mission, there will be news frame informing  
you that you will be in the next mission.  
5.3.2 Five piece chess  
5.3.1.2 Manipulation  
1. Choose ‘new game’in the ‘menu’of the  
soft key tip zone to restart the game.  
2. Choose ‘back’in the ‘menu’of the soft key  
tip zone to cancel the previous step of  
moving, one click of ‘back’can help to cancel  
one step.  
5.3.2.1 Game rules  
This is an IQ game, you are going to  
challege the computer. Who keep his five  
pieces in a straight first will be the winner.  
3. Choose ‘next mission’in the ‘menu’of the 5.3.2.2 Manipulation  
soft key tip zone to enter the next mission. 1. You can place your piece on the  
mission’in the chessboard by clicking with the touching pen  
4. Choose ‘previous  
‘menu’of the soft key tip zone to return the to start a new game.  
previous mission.  
2. You can choose ‘back’ in the menu of the  
5. Choose ‘selection’in the ‘menu’of the soft soft key tip zone to take back the previously  
key tip zone to choose from mission 1 to placed piece. You can keep on clicking ‘back’  
mission 70.  
until returning to the default state.  
6. After the game starts, you can click the 3. If the whole board is filled with pieces  
blank zone with the touching pen, the puller without a winner, there will be a news frame  
will go to the target zone. Move the puller to telling you that there is a standoff. Then a  
back of the box you want to move and click new game will be automatically started.  
 
4. Choose the ‘hint’ of the ‘menu’ of the soft  
key tip zone to reveal an ideal place for  
placing a piece. This function will help the  
beginners a lot.  
5. Choose the ‘level’ of the ‘menu’ of the soft  
key tip zone to set your level. You can  
choose ‘beginner’, ‘medium player’and  
‘advanced player’.  
There is an exit about 2 squares wide for  
Cao Chao to escape. There are 10 pieces of  
different sizes, representing Cao Chao,  
Zhang Fei, Zhao Yun, Ma Chao, Huang  
Zhong, Guangyu and 4 pawns respectively.  
After you enter the game window, there are  
only 2 squares unoccupied. Your task is to  
move the pieces with the touching pen to let  
Cao Chao to escape from the Huarong  
Route.  
2. Choose the ‘back’ of the ‘menu’ can  
cancel the previous move, you can click  
back continuously for 16 times.  
3. When the game is at the first mission (five  
passes), you can choose ‘the next mission’  
from the ‘menu’ of the soft key tip zone to  
enter the next mission.  
6. Press the right soft key (or click ‘quit’ of the  
soft key tip zone with the touching pen) to  
quit the game.  
5.3.3 Huarong Route  
‘Huarong Route’is a very ancient Chinese  
game. It is called one of world’s three  
incredibles due to its variable and interesting  
rules. You can play the game by click  
different pieces, counting many steps are  
needed to get out of the route. Also, you can  
play with your friends, who used the fewest  
steps to get of the route will be the winner.  
5.3.3.2 Manipulation  
4. When the game is at the last mission (no  
escape), you can choose ‘the previous  
mission’from the ‘menu’ of the soft key tip  
zone to return to the previous mission.  
5. After the completion of each mission, a  
news frame will be opened to inform you  
1. The game window is a chessboard with  
20 little squares, standing for Huarong route.  
 
that you will enter the next mission.  
6. Choose the ‘choose mission’ from the  
‘menu’ of the soft key tip zone to choose the  
mission you like. There are 6 missions: ‘five  
passes’, ‘siege’, ‘brave heart’, ‘fledge’, ‘Not  
far’ and ‘no escape’.  
the block you choose and drag it to the  
position you want and then lessen the block.  
2. Choose ‘back’ from the ‘menu’ of the soft  
key tip zone to quit the previous step. You  
can keep on clicking ‘back’ continuously for  
16 times.  
7. Choose the ‘ranking’ from the ‘menu’ of  
the soft key tip zone to see the highest score  
of each mission, that is, the fewest steps  
needed to get out of Huarong Route.  
8 Press the right soft key (or click ‘quit’ of the  
soft key tip zone with the touching pen) to  
quit the game.  
3. Choose the ‘previous mission’and ‘next  
mission’from the ‘menu’of the soft key tip  
zone to switch missions.  
4. Choose the ‘choose mission group’ from  
the ‘menu’ of the soft key tip zone to choose  
a mission group. Then press the left soft key  
(or click the ‘choose’of the soft key tip zone  
with the touching pen) to enter the  
corresponding mission group.  
5.3.4 Wujiandao  
5.3.4.1 Game rules  
Wujiandao is an interesting IQ game. There  
are blocks of different numbers and pictures  
in each mission. When the blocks with the  
same picture are moved together, they will  
be cleared away. You should try to clear all  
the blocks.  
5. Choose ‘restart the group’ from the ‘menu’  
of the soft key tip zone to clear all the  
records of the group and restart from the  
first mission of it.  
6. Choose ‘restart the mission’ from the  
‘menu’ of the soft key tip zone to restart the  
mission.  
5.3.4.2 Manipulations  
1. After entering the game, you should press  
7. Choose the ‘switch topic’ from the ‘menu’  
 
of the soft key tip zone to switch topic.  
5.3.4.3 Rules for scoring.  
input  
5.4.1. Key input  
After entering the game, the score will be  
presented to the upper right corner. 1 score  
for the completion for one mission. On the  
upper left corner of the screen, the reference  
steps for passing the present mission will be  
presented. A completion of the mission will  
be 5 score. If you use fewer steps to finish  
the mission, each step you save will be one  
additional score. On the contrary, if you use  
more steps, your default score will be taken  
out (no minus score). The scores will be  
amounted and the higher the scores, the  
fewer the steps you used.  
Notice: 1. Huarong Route and Wujiandao  
can only be manipulated with the touching  
pen.  
2. Box-pulling and Five pieces chess can be  
manipulated either with both keys and the  
touching pens.  
The mobile provide four input modes: Pinyin,  
English, 123(number) and strokes. You can  
set the input mode at the ‘mobile sets’. If you  
have chosen the selections item before the  
input modes, you can choose input mode to  
input in the editing frames without inputing  
content restrictions. E.g. If you choose  
pinyin and English at the ‘mobile sets’, then  
you can use both pinyin and English in the  
the editing frame without inputing content  
restrictions.  
As for the editing frames without inputing  
content restrictions, the default input mode  
is pinyin. However, the frames with  
restrictions, take the phonebook for example,  
you can only input number when you want to  
establish a new record. Thus, the default  
input mode is 123 for this frame.  
You can press * to switch the input  
mode. When you choose the English mode,  
you can choose 0 to swith the capitalized  
5.4 Input  
The board support key input and writing  
 
and uncapitalized alphabets. Under the  
pinyin and the English inputing mode, the  
number key 1 will be a blank key, that is, if  
you press number key 1, there will be a  
blank left on the screen. The cursor will  
appear by a press on #, and you can move  
the cursor to locate the character you want  
input by pressing the right soft key. If the  
cursor is at the pinyin selection items, you  
can also quit the input by pressing the left  
soft key. If the cursor is at the character  
selection items, a press of the left soft key  
will add the characters to the editing frame  
and the input window will be canceled.  
by pressing the up and down directions keys. As for the stroke mode, the number keys 1  
Press OK to confirm the character you  
choose.  
to 5 are marked with strokes. You can input  
according to the strokes, the input  
manipulation is the same as the pinyin  
mode.  
As for the English mode, you can press the  
number keys to type letters. A first press of a  
number key will type the first letter marked  
on it.  
When you use the pinyin mode, the number  
key 2 to 9 will represent the letters and you  
can press them to spell the character.  
During the input, the cursor will be at the  
pinyin selection item, you can switch the  
cursor among the pinyins by pressing left  
and right direction keys. You can press OK  
to confirm the pinyin you choose and the  
cursor will turn to the characters to be  
selected. If you want the cursor to return to  
the pinyin selection items, press CLR key.  
Also, you can press CLR key to edit the  
pinyin letters one by one. You can quit the  
5.4.2 Writing input  
You can move the curser to the editing  
frame and click the editing frame with the  
touching pen to switch to writing input mode.  
After entering the input mode, the cursor will  
be defaulted to Chinese if there is no  
content restriction to the frame. If there is a  
 
restriction to the input content, e.g. the  
phonebook, the default input mode will be  
123. According to the different inputing  
content, the writing input modes are divided  
into ‘Chinese’, ‘ABC-abc’, ’12,.’, @#、  
information’. Then you can begin the  
manipulation to the files in the MMC card.  
2. After the loading, click the SD icon on the  
TOP BAR to enter the list selection window.  
Then press up and down direction key ( or  
click with the touching pen) to choose and  
manipulate ‘install/ uninstall MMC/SD card’  
and ‘browse MMC/SD card’.  
3. During the operation of the ‘user’s  
information, press the up and down direction  
key (or click with the touching pen) to  
choose ‘mmc-sd1’and then press OK key (or  
click twice ‘mmc-sd1) to open ‘mmc-sd1’.  
Then you can operate the files in the MMC  
card as well as the files under other  
dialogues.  
.  
When you input the contents, if the content  
you want is already in the selection item,  
you can click it with the touching pen to add  
it to the editing frame.  
You can click to delete the input content.  
After the completion of the inputting, you can  
press the left or right soft key to cancel the  
input window.  
Under the writing mode, you can move the  
cursor by click the position for a time.  
5.5 MMC  
You can save files in the convenient MMC  
card, which can help to expend the saving  
space of the mobile phone.  
Warning: Any inappropriate insertiaon or  
pulling of the MMC card may lead to the  
instability of the system and the eternal  
damage to the MMC card.  
5.6 USB  
1. Insert the MMC card appropriately, after  
the completion of the loading, there will be a  
mmc-sd1 catalog under the ‘user’s  
The USB can help the mobile to connect the  
PC so that you can manipulate on the local  
 
catalog of the mobile more efficiently.  
1. When the mobile is used as a USB  
drive, the PC can operate the files  
under the‘user’s information’and there  
will only an installation folder under the  
root catalog of the mobile.  
kinescope format the user’s information  
or format it with the PC’. You use the  
‘kinescope optimize’to format the  
‘user’s information, or choose ‘format’of  
the USB drive to format the ‘user’s  
information on the PC. The former  
approach is recommended.  
2. If the mobile is not used as a USB drive,  
you  
can  
operate  
the  
‘user’s  
Warning: Any inappropriate insertiaon or  
pulling of the USB may lead to the  
instability of the system and the eternal  
damage to the USB.  
information’on the mobile and PC can’t  
operate on it.  
3. If the file system receives a slight  
damage, there will be a tip window  
‘slight damage on the file system, use  
PC to repair the user’s information’  
when the mobile is used as a USB  
driver. And you can choose the ‘auto  
repair of the errors’of the ‘check’ of the  
‘tool’ under the ‘property’of the USB  
drive on the PC. Then, you can press  
‘start’ to repair the system.  
4. If there is a severe damage to the  
system, there will be a tip window ‘file  
system damaged or unrecognizable,  
 
for advice.  
no) It is extremely cold.  
Trouble Shooting  
Slow  
(or  
keypad response  
Move to a warmer  
place and try again.  
Problem  
The  
Remedy  
display You need PIN code  
indicates that the and PUK coke to  
No  
display  
standby Press the Clear key  
Turn the phone off  
and then check if  
the SIM card and  
the battery are  
properly installed.  
phone is locked.  
No signal  
unlock the phone.  
Contact your  
service provider.  
You  
lose  
connection  
your  
Settings.  
with  
Network  
Your  
Switch  
phone  
again.  
on  
and  
the  
try  
location may be a  
blind area(like in a  
tunnel or between  
high-rises) or not  
covered by the  
Network Settings.  
Battery  
flashing  
icon The battery level is  
during extremely low or  
charging without the  
battery level temperature is out  
indicating bars  
ambient  
of the acceptable  
range(0-4.5 Celsius  
degree). Move the  
battery to a warmer  
place and wait  
Change  
your  
location and try  
again. Or contact  
the service center  
some  
minutes  
 
before  
changing.  
starting  
What  
difference  
is  
the Press  
key  
a
and  
number  
the  
between pressing number  
and pressing and displayed.  
holding a number pressing  
is  
When  
and  
Flashing backlight Detach the charger  
and battery icon, from the phone and  
prolonged beep replace  
with  
a
key  
holding  
(one  
and  
prompt genuine one.  
second at least) a  
number key, you  
“wrong  
accessory”  
can  
activate  
a
You can not use A car may contain  
the phone in a car some metal parts  
hotkey (refer to  
setting  
Hotkey)  
special  
(e.g.  
pressing and hold  
the [T9+*] key)  
up  
or  
symbol  
a
a
that  
absorb  
electromagnetic  
wave and thus  
have an adverse  
effect on phone  
performance.  
“+”when  
Purchase a car kit  
to allow hand-free  
Problem  
Remedy  
answer.  
Consult  
the local authorities  
No Date and Your phone has  
a
about  
use  
of  
times standby battery powered  
phones  
driving.  
while  
by the main battery. If  
the main battery is  
 
removed, a full charged  
standby battery could  
stand up to seven hours.  
Remove the battery  
before your phone is  
Switch  
the phone  
on Check if the connector is  
in good condition. Install  
the battery again and  
make sure it is in good  
contact with the phone.  
Charge the battery to  
full. Try again.  
turned off may lead to  
loss of information like  
Date and time too.  
You can not Check if call forward or  
No display of This feature is Network  
answer  
incoming  
calls  
call barring is activated.  
If yes, deactivate it.  
Send ID  
Settings  
dependent.  
Contact your service  
provider.  
The screen The SIM card may be  
Not allowed Many  
functions  
are  
prompts  
SIM  
error.  
a
damaged. Contact your  
to use  
certain  
function  
Failure  
send  
a
Network Settings  
dependent. Contact your  
service provider.  
card service provider.  
The screen Contact your service  
prompts and provider  
IMSI  
error  
to Messages feature is not  
a
available in all Network  
Settings. Contact your  
code  
Messages  
service  
details.  
provider  
for  
The screen Make sure your SIM  
prompts you card is properly inserted.  
You can not Remove the battery first.  
to insert your If  
problem  
remains  
 
SIM card  
uncorrected, the SIM  
card may be damaged.  
Contact your service  
provider.  
 
Potentially explosive atmospheres  
It is dangerous to use mobile phone in areas  
exposed to explosion risks.  
Safety and General Information  
Exposure to RF Energy  
Your phone contains a transmitter and a  
receiver. When it is ON, it receives and  
transmits radio frequency (RF) energy. The  
transmission power of mobile phone can be  
controlled with the GSM Network Settings.  
Your phone is designed to comply with all  
Turn your phone OFF when in any area  
with a potentially explosive atmosphere,  
such as gas station, oil tank and  
chemical plant, etc, and when the air  
contains metal ponder or grains, please  
Switch off your mobile in those places.  
Consult the local safety regulations first  
if you are to use your mobile phone on a  
vehicle loaded with explosives or  
flammables (even when the ignition is  
turned off) or on a vehicle powered by  
LPG.  
standards  
and  
guidelines  
regarding  
exposure of human beings to radio  
frequency electromagnetic energy and  
1999/5/EC  
on  
RF  
equipment  
and  
communication terminals  
Car  
Consult the car manufacturer to ensure that  
electronic equipment used on your car is  
adequately shielded from electromagnetic  
interference.  
Efficient Operation  
Efficient operation can improve your phone  
performance, lower RF energy and energy  
consumption.  
Blasting Areas  
For the sake of safety and optimum  
performance, hold your phone properly  
during a call, with the antenna above  
your shoulder and earpiece close to  
To avoid interfering with blasting operations,  
turn your phone OFF when in a “blasting  
area”. Obey all signs and instructions.  
 
your ear.  
appointed two batteries by the manufacturer,  
their capacity are respective 900mAh and  
1450mAh. The particular description as  
following:  
1. If the standard battery used on this  
phone is a Li-ion 900mAh battery, with a  
standby time is about 120-200 hours  
and the connection time is about  
150-220 minutes  
2. If the Li-ion 1450mAh battery used on  
your phone, its standby time is about  
200-300 hours; and the calling time is  
about 240-360 minutes.  
Notes: The standby time and the speaking  
time are made some difference based on  
the network condition.  
Avoid contact with antenna during a  
call.  
Do not use a phone the antenna of which is  
damaged. Touching a damaged antenna  
may cause slight burn. Ask a qualified  
technician or to replace the antenna for you.  
Use only genuine Haier parts.  
Avoid using your phone in areas of a weak  
signal, such as in tunnels or between  
high-rises. In these cased, the signal  
strength icon shows fewer bars than usual.  
Using non-Haier accessories may void the  
warranty. Haier is not responsible for  
damaged caused by using non-Haier  
accessories.  
Use only Genuine Haier charging  
accessories intended for specific phone  
Use of other accessories will void the  
warranty. The manufacturer of this phone is  
not responsible for damages caused by  
using non-original dealer accessories.  
models.  
Use  
of  
attachment  
not  
recommended by Haier may result dangers  
and void the warranty.  
Battery Use  
Do not touch the two poles of battery  
with metal (e.g. keys in your pocket) to  
prevent damage and injury result from  
This phone may allocation respectively  
 
battery short circuit.  
Compliance with Local Law and Regulation  
Cell phones may cause interference. Laws  
and regulations are passed with respect to  
this. Please consult local authorities for law  
information when purchasing a phone. If you  
are to use your phone when traveling,  
knowledge of relative laws and regulations  
in the destination area or country is helpful.  
Note: Strict laws and regulations are  
imposed on use of phone when driving or on  
board an aircraft.  
Do not fold or disassemble the battery.  
Do not throw the battery in fire or soak it  
in water.  
Responsibility  
User’s Responsibility  
Neglect may cause failure or injury. To avoid  
that, please read carefully the following  
safety precautions and keep people using  
your phone informed of them.  
To prevent any unauthorized use of your  
phone:  
Do not use your phone when you are in  
areas or countries without GSM Network  
Settings.  
Make sure your phone is put in a safe  
place and out of reach of children.  
Keep your PIN code in mind; do not  
write it down on pieces of paper.  
Turn the phone off when it is not used  
for a long time.  
Use While Driving  
It is dangerous to using a mobile phone  
when driving, because when using a phone,  
you cannot concentrate solely on driving.  
Children  
Give full attention to driving and to the  
road. If possible, park your car before  
using your phone,  
Your cell phone is not a toy. Make sure your  
phone is put in a safe place and out of reach  
of children. Do not allow children to play with Check the laws and regulations on the  
your phone, it may cause injury or damage. use of phones in the area where you  
 
drive. Always obey them.  
Battery  
Consult the car manufacturer to ensure  
that electronic equipment used on your  
car is adequately shielded from  
electromagnetic interference.  
: Indicating batteries should not  
be mixed with domestic waste.  
Packaging  
You are recommended to use  
a
hand-free car kit specially designed for  
this purpose. Always give full attention  
to driving and to the road.  
The use of front light and horn as alert  
of incoming calls are prohibited in some  
countries. Check the laws and  
regulations on the use of phones in the  
area where you drive. Always obey  
them.  
: Indicating that the packaging  
materials are recyclable.  
:
Indicating that the plastic  
materials are recyclable.  
Adequate care and maintenance can ensure  
you many years of trouble free operation.  
Please keep your phone dry and clean.  
Care and maintenance  
Important  
Environment protection  
Local laws and regulations on disposal and  
recycle of packaging materials, old batteries  
and phones should be observed.  
Standard symbols are designed for  
appropriate disposal and recycle.  
Your mobile is a product of high technology.  
Do not leave the phone in a place of dirt  
and heavy dust to prevent  
contamination of detachable parts.  
Do not store/use the phone at an  
extremely high temperature that may be  
 
harmful to electronic element and  
battery, or cause distortion or  
deformation of the plastic parts.  
Do not attempt to repair the phone or its  
accessories by yourself. You can dial  
the hot line number of Haier when your  
phone cannot be operated normally.  
Always purchase and use Haier  
batteries and chargers.  
Protect the phone from dropping,  
impact, and violent vibration.  
Keep the phone and its accessories out  
of reach of children.  
Keep the phone dry. Do not clean the  
phone with chemical solvent or  
detergent. Use a cotton cloth with water  
or neutral soap solution to clean the  
shell gently.  
Version 3 Aug. 2005  
Compliance: Q/02 HTX001-2005  
Switch off the phone without delay if it  
becomes wet. Remove the battery and  
allow it to dry in the air. Inspect and  
make sure whether the phone functions  
properly.  
 

Graco Baby Playpen PD213070A User Manual
Grizzly Drill G8593 User Manual
Hamilton Beach Mixer Drink Mixer User Manual
Harman Stove Company Outdoor Fireplace DVC 500 User Manual
Honeywell Thermostat CPFILA User Manual
Hotpoint Washer 9774 User Manual
HP Hewlett Packard Server AA RTDRB TE User Manual
Husqvarna Chainsaw 223L User Manual
hussman Kitchen Utensil P N IGUP AB 0904 User Manual
iLive CD Player IJ308W User Manual